te150 converted tx but no rx, any ideas please
by ken
i just did the link conversion on a te150, i seem to transmit on lpd mode but no receive, yet pmr mode still works fine, i have read all of the previous posts and cant seem to find this problem before, has anyoine any ideas please, thanks...ken
Re: te150 converted tx but no rx, any ideas please
by Per Mårtnesson SM0UAX
The voltage on the oscillator is to low.
On the small PCB there is a little hole. Behind it there is a coil try to make the windings closer. You can measure the VCO voltage on a via just down left from the hole ( a long stripe makes a turn around this via). You will have round or below 0.5v and you can increase it by pressing the coil together
SM0UAX
Re: te150 converted tx but no rx, any ideas please
by ken
great, thank you, wonderful, may i email delboy to ask him to put it on the mod page as it seems to be a vital part of the modification, i squuezed the coil together and it worked straight away, what can i say, many thanks regards....ken