Home > Discussion Groups > Constructive Comments
 Return to Index  

Turret Zimmerit

March 2 2017 at 2:37 PM
Peter Chippure  (Login pchippure)
Missing-Lynx members
from IP address 104.129.192.56


Response to About zimmerit:

Hi Cesare,

I actually made a mini chisel by using a dremel to grind off about 2/3 (or more) of a flat Olfa blade. I then had a very small flat blade, chucked it in my Olfa knife handle, and used that to clear off the zimmerit (I marked off the area with tape/pencil).
Once things were close, I then used Tamiya Surface Primer w/ a brush to fill in the small flaws and then finally used some sandpaper to finish it off. If you have a look at the unpainted pics you can see the Tamiya surface filler at work.

 
 Respond to this message   


Terms and Conditions of Use
Report abuse