Return to Index  

MIke....

December 14 2011 at 8:49 AM

  (Login WVscott)
YFOT


Response to Height above the barrel and also eye relief is a challenge

that's exactly what I thought I'd do: leave the bushings in the wood and cut the top of the forearm section off. That way you still have something to hold onto. The trick (not being a machinist and only having a drill press) is getting the top holes drilled perfectly in line so that the scope rail is parallel with the barrel. Thanks for the other info. I was also thinking of somehow adding a thin curved piece of wood over the rear receiver section as a cheek rest for the low mounted scope. If you lower the adjustable buttpad all the way it helps to line up with a lower scope.
regards, Scott

 
 Respond to this message   
Responses


 

D I S C L A I M E R
JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums by people under 18 years old is allowed only with legal guardian(s) present..