Return to Index  

To smooth it out....

March 28 2012 at 8:16 AM
Mike melick  (Login mikeiniowa)

Response to help with a project

just some easy to do things, remove top hat (replace with Delrin or not) tighten up the rear guide. Shouldn't have to replace any seals unless they are leaking or just plain chewed up. Look into a JM spring, can make a much smoother rifle. Don't worry about velocity loss as it is somewhat over powered, find a smooth firing spot then work on getting any loss back if you really need the super velocity...I've done a few and they do smooth out very nicely...polish well and lightly lube, if you have to go back in and add lube it's better than having to much to start with...if you replace the spring shoot about 100 shots with the old one then disassemble but leave piston in place and then put new spring in. Flying Dragon Air Rifles 515-924-3699

 Respond to this message   


JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums by people under 18 years old is allowed only with legal guardian(s) present..