no jig butJune 17 2012 at 12:55 AM
|frank (Login NewportAL)|
Response to Does any one have/make a jig for taking down the TF99 underlever?
you will need a good spring compressor to take the TF99/Qb36-2 apart. It does have a plastic spring guide. If you do decide to take the Ag apart: Watch out for the pin in the trigger and the cocking arm pin they are loose fitting and can get lost very easily. also pay attention to which way the trigger spring goes. You also may want to get a Qb36-2 kit from Mr. Archer so you can change out the leather seal and if your spring looks bent you can change it out also. I think a metal spring guide would be a great ideal for the TF99.