Am looking for a driver for a board with no fcc number
and no indication of who made this.All i know is there
a PCTEL PCT789T chip on it the cicuit board number is
N1 94V-0 9906,Tere is also a "ce" code and an sn code.
Please help have tried everywhere .This was a very cheap bundled modem which was supplied 2years ago by someone who went bust
my modem wont detect a dial tone. but I did a diagnostics test on the modem. I get the following -- Port Com2 -- Interrupt 10 -- address 14CO -- identifier no hardware Id -- AT11 A97/CO2 -- AT12 ok -- AT 13 PCtel HSP56 -- AT 14 PCtel HSP56 -- AT16 ok -- AT17 ok -- AT+FCLA 0,1,8
Any ideas????
HAVE YOU HEARD ANYTHING, I'M STUCK TOO. I THINK THE WEB SITE IS DEAD, ALOT OF THE LINKS DON'T WORK AND READING ON ONLY SAYS THINGS ABOUT WINDOWS 95 LIKE IT'S THE LATEST THING.
The modem is on PcChips M810LMR with 800 duron CPU, Pc133 memory, Win 98SE.
Installed itself on Com 4 but I do not think this port is recognised and also the IRQ may be wrong. Tried it on Com 2 but still will not work.
As a greenhorn can someone tell me how to change the IRQ because I have a feeling that this is the trouble.
Downloaded HSP Configurator but no info available and PcChips no help.
This is driving me mad!!
Can someone email me with suggestions of how to set up this modem?
Regards,
Syb
Still struggling with this Modem.
The installation appears to put the modem on a port with an IRQ and Windows assigns a different IRQ. Cannot change this in the normal way. How do I do this in BIOS?
Any help appreciated.
Syb.
Hi, I've just installed the same modem on exactly the same board. The installation went fine and you don't normally have to worry about which COM port to use as long as you don't have any conflicts with other devices, Windows should be able to detect you modem. If you are having problems with 'No Dial Tone' messages, (as I am), I have been told that this is due to lower line voltages used by cable companies (if you are on cable). I'm sorry but I don't have any answers to this and if anybody comes up with anything, PLEASE, PLEASE let me know. Thanks.
Al
I need the driver for an HSP56MR modem for Windows 98. I'm unable to find it anywhere. This modem uses the new modem slot (AMR??). It's not an IDE or PCI. Just got this computer last week and was hooking up at 40K. Something hicuped and now I hook up at 28.8K
Please help!!! Thanks!
Hi,
I do have a driver for this modem, but I'm not sure if it's O.K. I have just installed this modem and driver but can't dial out because I keep getting 'No Dial Tone' errors. I saw on a site somewhere that this problem was common with this modem in the U.K. because of lower line voltages with cable companies (I'm with NTL) but they did not offer any solution. You are welcome to try my driver if you send me you e-mail addy.
Al.
HELP I have a similar problem to you and in trying to cure it have wiped the modem driver. Could you please send me a fresh copy as I do not have it on software. thanks in anticipation Bernard.
i cannot access your download for hsp56 (micromodem) windows 95 intel pc modem driver. I have been told i have to update my driver could you PLEASE SEND ME AN UPDATED DRIVER. I thankyou very much for your help.
mine is amicro modem v.90 kflex56 pctel. how to make its sound clear through telephone line? since I am using voice modem application. Your assistance is welcome and appreciated
