<< Previous Topic | Next Topic >>  

help timing digi I

August 1 2002 at 8:24 PM
No score for this post
  (no login)
from IP address 162.96.253.16

 
I need help timing my digi I from a g60, can someone lisst the procedure for me please???

Thanks, this board is awesome!
R

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
AuthorReply
Tony
(no login)
207.190.201.234

Re: help timing digi I

No score for this post
August 2 2002, 8:32 AM 

unplug the blue coolant sensor. keep the car between 2000-2500 rpm. Timing is 6 degrees

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
leo
(no login)
152.163.188.194

if....

No score for this post
August 2 2002, 3:56 PM 

if timing is way off, the car will turn of when you unplug the sensor, rotate the dist. and try again, once you get the car runing w/ the plug off, get the timing light out, you can check thru the hole on the tranny....leo

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Roman
(no login)
162.96.253.16

thanks guys!

No score for this post
August 2 2002, 10:40 PM 

THANKS!!!!!

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Chuck B
(no login)
216.17.11.178

Make sure your idle switch is working.

No score for this post
August 5 2002, 11:12 PM 

It may idle without it with the coolant temp sensor plugged in,butit will kill if you unplug it.

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Current Topic - help timing digi I
  << Previous Topic | Next Topic >>  
Create your own forum at Network54
 Copyright © 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement