I just realized that my quote on the fuel pressure for the red top injectors is wrong. I did it from memory (which is not a very good thing to do)
NOW!! Quoting straight from the page .
injectors 280 150 911 has 2 readings.
1) 311 cc/min(30.0lbs/hr) @ 2.5bar or 36.3psi
2) 342 cc/ " (33.0 " ) @ 3.1bar or 45.0 psi

Sorry for the wrong info.
or better yet here is the site ( again. I got it originally from the hardcore page)
//ftp.diy-efi.org/incoming/fuelflow.txt
Hope it works.

I've got some red top injectors laying around with a 931 instead of a 911 on the part number. Do you have any specs on these?

those flow 192cc/min and they are 16 Ohms injectors.on the V6 4.0L ford they are good enough for 38hp each.

1999 Seat Cordoba SX 16v TB0357 everything is custom made, lower CR using 8v pistons, 308cc/min injectors and SMT5-I piggyback system. AIM :nabilsx
http://photos.yahoo.com/nabilsx

I have 2 charts bookmarked & neither has any info on it. The only bit of info is that it is from a ford truck 4.0 v6.