Welcome to the Carvingpost Forum
An internet community dedicated to the art of chainsaw carving & friends

  << Previous Topic | Next Topic >><< Back  

CS310 parts needed

April 25 2017 at 5:05 PM
Brian  (no login)

I picked up an echo 310 but it needs some parts. Wondering if anyone has and extra parts from a dead saw.
Need a side cover plate and drive sprocket. 3/8 0r 1/4 will do.Thanks for reading.

 
 Respond to this message   
AuthorReply
brian
(no login)

oops

April 25 2017, 6:28 PM 

realized there is no 1/4 pitch sprocket for this saw.

 
 Respond to this message   
ROOSTER
(Login jay.kay)

310 sprocket

April 26 2017, 11:51 AM 

I started carving with an ECHO 306 and would love to have been able to use the 310 but, no aftermarket is available in North Am.
Brian Harnett had posted a conversion for the 310 that can actually work for number of saws.

http://www.network54.com/Forum/118564/message/1440759342

Having said all of that I just purchased a used Husqvarna 543XP to use with a 12 inch cannon .05 dime.

Russ
www.chainsawcarve.ca

 
 Respond to this message   
Brian
(no login)

Thx

April 26 2017, 2:36 PM 

Thanks Russ. I don't mind running a 3/8. but need some parts to get there.

 
 Respond to this message   
Indy
(Login D.R.)

Re: Thx

April 27 2017, 8:40 PM 

I have several new 3/8 sprockets from my 346 top handle echo's. If you can find out if they will work, you can have one. I took them off and replaced with the 1/4.

 
 Respond to this message   
Brian
(no login)

Thx

April 30 2017, 3:14 PM 

Thanks Doug, I'm afraid since there is no 1/4 pitch that fits that saw the 3/8's you have probably won't fit but I'll check.

 
 Respond to this message   
 
  << Previous Topic | Next Topic >><< Back  
This forum brought to you by the United Chainsaw Carvers Guild