Clevelands Forever!
351Cleveland.net

This forum is for the discussion of the US Ford 351 Cleveland, 351M (MODIFIED), 400 and Aussie 302C and 351C engines.

POST MESSAGE___ SEARCH___ CLASSIFIED ADS___ PHOTOS

USEFUL LINKS___ GUITAR AMPS___THE BENCH___MEMBERSHIP

The Cleveland Wiki

This forum requires membership for posting messages. Anyone can read, but you will have to be a member to post. For instructions on how to apply for membership, go here. It's easy and free!

Info on the New Tod Buttermore Cleveland Block

Visitors in this forum in the last 10 minutes: 13 Visitors
davidn3, methylated, 11 guests

Not logged in | Login | Create Account

Search "Engine Build Forum" Post now!

Does the air cleaner amplify valve train noise? View Thread - david on Nov 19, 2009, 2:44 PM

holly cow!!! I think it worked - dave on Nov 19, 2009, 6:39 PM

What you said confused me... - danford1 on Nov 19, 2009, 10:20 PM

Re: What you said confused me... - tinman on Nov 19, 2009, 10:28 PM

or - BigA on Nov 19, 2009, 10:42 PM

Re: What you said confused me... - dave on Nov 20, 2009, 8:25 AM

crank - Dan Nelson on Nov 20, 2009, 7:05 AM

video. - dave on Nov 20, 2009, 1:03 PM

Re: video. - Coupe3w on Nov 20, 2009, 1:27 PM

Re: video. - Dan Nelson on Nov 20, 2009, 5:16 PM

Re: video. - david on Nov 20, 2009, 9:04 PM

knock - tinman on Nov 21, 2009, 5:07 AM

Re: knock - Dan Nelson on Nov 21, 2009, 5:17 AM

tried a few things - david on Nov 21, 2009, 12:39 PM

Re: tried a few things - ZZ28 on Nov 21, 2009, 6:55 PM

Re: tried a few things - dave on Nov 22, 2009, 1:09 PM

Re: tried a few things - randy9685 on Nov 23, 2009, 3:17 PM

problem found, but how to solve - dave on Nov 24, 2009, 5:44 PM

Re: problem found, but how to solve - ZZ28 on Nov 24, 2009, 6:12 PM

can you show pix of the rod bearings ? - joe on Nov 24, 2009, 6:55 PM

Re: can you show pix of the rod bearings ? - dave on Nov 24, 2009, 7:51 PM

this is about those elite comps zz was talking about View Thread - joe on Nov 24, 2009, 6:49 PM

Help! Update on "a lot of oil in the valve covers" View Thread - T351CJ on Nov 21, 2009, 9:25 AM

Joe had a line on "stingy" lifters maybe your best bet - blizz on Nov 21, 2009, 9:52 AM

solid rollers - tinman on Nov 21, 2009, 10:19 AM

Oil holes are not lined up with lifter holes - T351CJ on Nov 21, 2009, 10:43 AM

so then - tinman on Nov 21, 2009, 10:57 AM

not rollers - joe on Nov 21, 2009, 7:55 PM

Restricting lifters - shaneus on Nov 21, 2009, 11:46 AM

Re: Restricting lifters - Coupe3w on Nov 21, 2009, 12:43 PM

Good ideas, thanks - T351CJ on Nov 21, 2009, 1:25 PM

seems to me - dave on Nov 21, 2009, 1:54 PM

I fear you're probably right - T351CJ on Nov 21, 2009, 3:18 PM

Re: I fear you're probably right - ZZ28 on Nov 21, 2009, 3:46 PM

Thanks for the insight ZZ - T351CJ on Nov 21, 2009, 4:10 PM

Re: Thanks for the insight ZZ - ZZ28 on Nov 21, 2009, 4:36 PM

Restrictors - shaneus on Nov 21, 2009, 5:03 PM

buttons - dion on Nov 21, 2009, 5:31 PM

Re: buttons - ZZ28 on Nov 21, 2009, 5:43 PM

Re: Help! Update on "a lot of oil in the valve covers" - Dan Nelson on Nov 21, 2009, 6:36 PM

Re: Help! Update on "a lot of oil in the valve covers" - ZZ28 on Nov 21, 2009, 6:44 PM

Re: Help! Update on "a lot of oil in the valve covers" - Dan Nelson on Nov 21, 2009, 7:18 PM

Re: Help! Update on "a lot of oil in the valve covers" - ZZ28 on Nov 22, 2009, 7:14 AM

How well do those lifters hold up to street driving? - danford1 on Nov 22, 2009, 9:54 AM

Re: How well do those lifters hold up to street driving? - ZZ28 on Nov 22, 2009, 3:34 PM

So it's safe to say - T351CJ on Nov 22, 2009, 12:44 PM

Re: So it's safe to say - ZZ28 on Nov 22, 2009, 3:50 PM

Re: Help! Update on "a lot of oil in the valve covers" - Brad Smith on Nov 22, 2009, 2:25 PM

Another update - T351CJ on Nov 23, 2009, 9:35 AM

Re: Another update - ZZ28 on Nov 23, 2009, 4:20 PM

Just pull a rocker cover - clevochild on Nov 23, 2009, 4:28 PM

Re: Another update again - ZZ28 on Nov 23, 2009, 6:02 PM

I hear ya ZZ - T351CJ on Nov 23, 2009, 8:15 PM

Re: I hear ya ZZ - Dan Nelson on Nov 23, 2009, 8:53 PM

Re: I hear ya ZZ - ZZ28 on Nov 24, 2009, 5:38 PM

How to Post Pictures On this forum, (If youre reading this on a sat nite) practice time!!! View Thread - blizz on Nov 14, 2009, 5:43 PM

Saturday night - jorge on Nov 14, 2009, 6:14 PM

[img] brackets not required - tinman on Nov 14, 2009, 6:21 PM

Glen - dave on Nov 14, 2009, 6:26 PM

no way - tinman on Nov 14, 2009, 7:01 PM

I hate this Bull'$ h!t - Travis on Nov 14, 2009, 6:38 PM

try again - Travis on Nov 14, 2009, 6:44 PM

now how to get pics - Travis on Nov 14, 2009, 6:48 PM

get a USB media card reader... or use the cameras cable connection.. - blizz on Nov 14, 2009, 6:57 PM

will it clear the card if - Travis on Nov 14, 2009, 7:22 PM

you just copy them, not cut, and the card should be just fine, just like a harddrive - blizz on Nov 14, 2009, 7:28 PM

wife is working. ITS ALONE TIME. - Travis on Nov 14, 2009, 7:32 PM

You really need to get them copied to your harddrive then burned to some CD's - blizz on Nov 14, 2009, 7:37 PM

video - Dan Nelson on Nov 14, 2009, 7:48 PM

bridezi-lalas - tinman on Nov 14, 2009, 8:37 PM

I have a canon eos rebel - Travis on Nov 14, 2009, 7:37 PM

does it have a cable? nm - blizz on Nov 14, 2009, 7:40 PM

yes, wife called said she be home in a min. - Travis on Nov 14, 2009, 7:45 PM

new pics - Travis on Nov 14, 2009, 8:11 PM

try this - Travis on Nov 14, 2009, 8:13 PM

and this - Travis on Nov 14, 2009, 8:14 PM

money - Travis on Nov 14, 2009, 8:16 PM

Give it a shot - ZZ28 on Nov 14, 2009, 7:54 PM

Here goes - tonycando on Nov 14, 2009, 8:14 PM

now I hope i don't forget how to keep doing pics n/m - Travis on Nov 14, 2009, 8:28 PM

I want to play! - Eric on Nov 15, 2009, 12:10 AM

Re: I want to play! - Coupe3w on Nov 15, 2009, 7:05 AM

Nice coffee table - Danford1 on Nov 15, 2009, 10:48 AM

pm's - John on Nov 16, 2009, 9:34 AM

Re: How to Post Pictures On this forum, (If youre reading this on a sat nite) practice time!!! - Earl Nagle on Nov 16, 2009, 11:57 AM

Re: How to Post Pictures On this forum, (If youre reading this on a sat nite) practice time!!! - Keith Hartley on Nov 23, 2009, 9:21 PM

Keith did you move your picture on the online site that you have them stored - blizz on Nov 24, 2009, 6:10 AM

Re: Keith did you move your picture on the online site that you have them stored - Keith Hartley on Nov 24, 2009, 4:00 PM

Next build and parts check View Thread - Topham Lee on Nov 23, 2009, 12:05 PM

Camshaft selection quesiton in isle six! - blizz on Nov 24, 2009, 6:14 AM

Possible problems - Topham Lee on Nov 24, 2009, 12:47 PM

Re: Possible problems - Adrian on Nov 24, 2009, 12:52 PM

Stroker - Topham Lee on Nov 24, 2009, 1:06 PM

Stroker Cleveland in a Cobra... - blizz on Nov 24, 2009, 1:13 PM

Tyres - Topham Lee on Nov 24, 2009, 1:45 PM

The problem is .... - George Pence on Nov 24, 2009, 1:34 PM

Dimensions - Topham Lee on Nov 24, 2009, 2:25 PM

Compression Calcs & Cam Recommendation - George Pence on Nov 24, 2009, 3:35 PM

Missing some parts....can you help ID View Thread - Dan on Nov 21, 2009, 2:58 PM

Pipe plugs - jorge on Nov 21, 2009, 3:06 PM

Re: pipe plugs - ZZ28 on Nov 21, 2009, 3:47 PM

Be very careful here - Lowell on Nov 21, 2009, 6:19 PM

Re: Be very careful here - ZZ28 on Nov 21, 2009, 6:46 PM

Re: Missing some parts....can you help ID - Dan Nelson on Nov 21, 2009, 6:46 PM

Re: Missing some parts...can you help ID - ZZ28 on Nov 21, 2009, 6:47 PM

Re: Missing some parts....can you help ID - Dan on Nov 21, 2009, 6:50 PM

Re: Missing some parts....can you help ID - Dan Nelson on Nov 21, 2009, 6:55 PM

Re: Missing some parts...can you help ID - ZZ28 on Nov 21, 2009, 7:02 PM

Re: Missing some parts...can you help ID - Dan on Nov 21, 2009, 7:44 PM

Re: Missing some parts...can you help ID - ZZ28 on Nov 22, 2009, 7:17 AM

Yes please - Dan on Nov 22, 2009, 12:37 PM

Depending on how your search goes - TMeyer on Nov 22, 2009, 1:02 PM

Sounds good - Dan on Nov 22, 2009, 5:10 PM

Re: Sounds good - TMeyer on Nov 22, 2009, 8:29 PM

Re: Yes please - ZZ28 on Nov 22, 2009, 5:16 PM

great - Dan on Nov 22, 2009, 6:16 PM

Re; great - ZZ28 on Nov 23, 2009, 1:34 PM

Address - Dan on Nov 23, 2009, 4:57 PM

Re: Address - ZZ28 on Nov 23, 2009, 5:26 PM

Re: Address - ZZ28 on Nov 24, 2009, 2:44 PM

Check your e-mail n/m - Mark McKeown on Nov 23, 2009, 5:01 PM

Re: Missing some parts....can you help ID - Dan Nelson on Nov 21, 2009, 7:05 PM

Hopefully you don't get... - TMeyer on Nov 21, 2009, 7:20 PM

Re: Missing some parts....can you help ID - TMeyer on Nov 21, 2009, 7:00 PM

Re: Missing some parts...can you help ID - ZZ28 on Nov 21, 2009, 7:07 PM

Re: Missing some parts...can you help ID - TMeyer on Nov 21, 2009, 7:17 PM

Re: Missing some parts...can you help ID - Dan on Nov 21, 2009, 7:34 PM

Re: Missing some parts...can you help ID - TMeyer on Nov 21, 2009, 7:49 PM

can they be installed wrong? - jorgem on Nov 22, 2009, 6:53 AM

anybody know View Thread - randy9685 on Nov 21, 2009, 12:16 PM

somebody does - tinman on Nov 22, 2009, 7:21 PM

but not me - joe on Nov 22, 2009, 7:46 PM

Re: anybody know - TMeyer on Nov 22, 2009, 8:46 PM

Re: anybody know - Tony on Nov 22, 2009, 9:06 PM

so - randy9685 on Nov 23, 2009, 7:05 AM

Re: so - randy9685 on Nov 23, 2009, 7:37 AM

Starter - Mark McKeown on Nov 23, 2009, 5:21 AM

Re So.. - Tony on Nov 24, 2009, 12:54 AM

Tony are you surer - tinman on Nov 24, 2009, 3:26 AM

Yes. - Tony on Nov 24, 2009, 11:10 AM

Camshaft timing...... View Thread - ty on Oct 27, 2009, 5:00 AM

" chevy lobes " - joe on Nov 22, 2009, 7:32 PM

Re: " chevy lobes " - randy9685 on Nov 23, 2009, 7:21 AM

use lobes designed for a ford - joe on Nov 23, 2009, 11:31 AM

Re: use lobes designed for a ford - tinman on Nov 23, 2009, 12:29 PM

I believe even the bbc has smaller journals than the 351c - joe on Nov 23, 2009, 12:56 PM

Re: use lobes designed for a ford - randy9685 on Nov 23, 2009, 3:05 PM

two cams - joe on Nov 23, 2009, 4:16 PM

Re: two cams - Mark McKeown on Nov 23, 2009, 5:00 PM

Randy - joe on Nov 23, 2009, 6:44 PM

Re: Randy - tinman on Nov 23, 2009, 10:31 PM

thanks - randy9685 on Nov 24, 2009, 8:11 AM

Why a cleveland? View Thread - Jeremy on Nov 18, 2009, 2:38 PM

Hi Jeremy ... - George Pence on Nov 18, 2009, 3:50 PM

Bullseye - Mark McKeown on Nov 18, 2009, 5:01 PM

re:bullseye - Jeremy on Nov 19, 2009, 11:49 AM

out running your buddy - randy9685 on Nov 19, 2009, 3:03 PM

Thank you! - Jeremy on Nov 19, 2009, 11:56 AM

Jeremy - dave on Nov 18, 2009, 5:53 PM

Why a Cleveland? - Craig Maynard on Nov 19, 2009, 9:01 AM

Re: Why a Cleveland? - Coupe3w on Nov 19, 2009, 12:04 PM

Re: Why a Cleveland? - 70TooMach on Nov 19, 2009, 1:02 PM

In - Jeremy on Nov 19, 2009, 2:38 PM

pics and numbers - Andy White on Nov 19, 2009, 2:40 PM

Re: pics and numbers - Craig Maynard on Nov 19, 2009, 3:13 PM

Pictures of Pulleys with #'s - Jeremy on Nov 19, 2009, 4:29 PM

Re: Pictures of Pulleys with #'s - 70TooMach on Nov 19, 2009, 4:57 PM

? - Jeremy on Nov 19, 2009, 5:08 PM

Re: ? - Craig Maynard on Nov 19, 2009, 8:10 PM

Pulley's - Jeremy on Nov 19, 2009, 9:56 PM

Serpentine set up - danford1 on Nov 19, 2009, 10:05 PM

Cam???? - Jeremy on Nov 20, 2009, 9:40 AM

Dial indicator and degree wheel - danford1 on Nov 20, 2009, 12:57 PM

Great list here - Kevin Black on Nov 20, 2009, 4:25 PM

Awesome - Jermey on Nov 23, 2009, 11:48 AM

Re: Awesome - Kevin Black on Nov 24, 2009, 7:15 AM

Todays progress View Thread - Mark McKeown on Nov 19, 2009, 5:07 PM

weight - pauly on Nov 19, 2009, 5:31 PM

weight...wonder if it is 200 Lbs like XE Nascar Block... or more - Chad on Nov 19, 2009, 5:41 PM

doesn't have full bulkheads like the nascar block but - joe on Nov 19, 2009, 6:36 PM

doesn't have full bulkheads like the nascar block but - Chad on Nov 20, 2009, 8:50 PM

tell him I checked my bushed 1st gears - joe on Nov 21, 2009, 8:09 PM

that Cougar is a killer custom piece... - Chad on Nov 22, 2009, 1:51 AM

A wise practice ! - joe on Nov 22, 2009, 11:29 AM

Re: Todays progress - ZZ28 on Nov 19, 2009, 5:34 PM

The new block uses a priority main oiling system. - Tom Custom on Nov 19, 2009, 6:13 PM

Tod/Mark caan you give us a report on the base block before you begin.. - blizz on Nov 19, 2009, 6:34 PM

Machining explanation ..........or confusion - Mark McKeown on Nov 20, 2009, 2:01 PM

Thanksgiving week update??? nm - blizz on Nov 24, 2009, 7:04 AM

Differential Tags View Thread - Roy on Nov 22, 2009, 7:17 PM

I dont know that the tag tells you anything but the ratio - joe on Nov 22, 2009, 7:48 PM

Re: I dont know that the tag tells you anything but the ratio - Roy on Nov 22, 2009, 7:50 PM

I dont know anything that might be useful with regards to a restoration - joe on Nov 22, 2009, 7:59 PM

tags - john on Nov 23, 2009, 4:18 AM

tags - jorge on Nov 23, 2009, 4:27 AM

ok - Roy on Nov 23, 2009, 4:44 AM

tags - john on Nov 24, 2009, 4:01 AM

Hydraulic Roller - tie-bar vs spider View Thread - Walkinshaw on Nov 21, 2009, 7:32 AM

Can't always use a spider - Jim Sams on Nov 21, 2009, 10:24 AM

Re: Can't always use a spider - tinman on Nov 21, 2009, 11:04 AM

Re: Can't always use a spider - Walkinshaw on Nov 22, 2009, 3:43 AM

low rpm - dion on Nov 22, 2009, 4:07 AM

Re: low rpm - Walkinshaw on Nov 22, 2009, 4:34 AM

Re: low rpm - Dan Nelson on Nov 22, 2009, 5:27 AM

What roller cams are these ? - danford1 on Nov 22, 2009, 9:48 AM

HR lobe profile - Walkinshaw on Nov 23, 2009, 12:14 AM

Re: Hydraulic Roller - tie-bar vs spider - ZZ28 on Nov 22, 2009, 7:26 AM

From what we have experienced... - TMeyer on Nov 22, 2009, 10:15 AM

Contact Denny Wydendorf .... - George Pence on Nov 22, 2009, 1:46 PM

Re: Hydraulic Roller - tie-bar vs spider - Mark McKeown on Nov 22, 2009, 5:29 PM

Do it once do it right - Walkinshaw on Nov 23, 2009, 12:19 AM

The Trick Flow lifters are $429, Comp solid rollers are $359 - Danford1 on Nov 23, 2009, 4:52 AM

Re: Do it once do it right - Mark McKeown on Nov 23, 2009, 5:30 AM

Re: Do it once do it right - TMeyer on Nov 23, 2009, 7:07 AM

What is the Lunati part number? - Danford1 on Nov 23, 2009, 8:32 AM

these ones? - Walkinshaw on Nov 23, 2009, 12:32 PM

Re: these ones? - TMeyer on Nov 23, 2009, 5:29 PM

back from the track 2 View Thread - Rick Mcmarin on Nov 15, 2009, 4:23 AM

Rick, can ya tell us more about your uncles rail... Is it a clevo rail? - blizz on Nov 23, 2009, 6:43 AM

rail - rick on Nov 23, 2009, 4:00 PM

408 build underway... View Thread - Dave c on Nov 22, 2009, 4:10 PM

408 build. - T351CJ on Nov 22, 2009, 7:37 PM

Re: 408 build. - Dave c on Nov 22, 2009, 8:04 PM

Re: 408 build. - dion on Nov 22, 2009, 11:59 PM

re:408 build - T351CJ on Nov 23, 2009, 7:31 AM

Re: re:408 build - dion on Nov 23, 2009, 1:10 PM

Lucky! - T351CJ on Nov 23, 2009, 1:23 PM

Ford Swap Meet thanksgiving weekend View Thread - James Willett on Nov 20, 2009, 5:26 PM

I'll be there... - clevelandstyle on Nov 20, 2009, 6:14 PM

stop by bs - James Willett on Nov 21, 2009, 4:12 AM

Re: stop by bs - DragBoss on Nov 21, 2009, 8:02 AM

Re: stop by bs - Jesse L on Nov 21, 2009, 9:06 AM

I'll be there on Sat. - Phil on Nov 21, 2009, 2:46 PM

Aghorn building - James Willett on Nov 22, 2009, 7:25 AM

Lucky - Jeremy on Nov 23, 2009, 11:52 AM

about the factory 4V head View Thread - tinman on Nov 19, 2009, 10:10 PM

ttt - tinman on Nov 22, 2009, 7:17 PM

you cant bump your own messages ! - joe on Nov 22, 2009, 7:45 PM

Re: you cant bump your own messages ! - Matt0matic on Nov 23, 2009, 7:59 AM

245 cc 5.1 centerline - joe on Nov 23, 2009, 11:10 AM

1970 4V Cam Specs View Thread - Kevin on Nov 6, 2009, 12:20 PM

Re: 1970 4V Cam Specs - tinman on Nov 22, 2009, 7:01 PM

at .100 it was - joe on Nov 22, 2009, 7:06 PM

The 0.050" specs for that cam have never been published - George Pence on Nov 22, 2009, 9:34 PM

351C Camshaft View Thread - Roy on Nov 8, 2009, 3:15 AM

I dont see a AA listed for any small block - joe on Nov 22, 2009, 7:07 PM

mmm - Roy on Nov 22, 2009, 7:13 PM

well - joe on Nov 22, 2009, 7:51 PM

What camshaft should I pic? View Thread - Hans on Nov 18, 2009, 12:31 PM

A big one - joe on Nov 22, 2009, 7:35 PM

I agree with Joe - T351CJ on Nov 22, 2009, 7:41 PM

more about the idling fix View Thread - dave on Sep 30, 2009, 12:15 PM

Re: more about the idling fix - dave on Sep 30, 2009, 1:47 PM

its not easy - joe on Nov 22, 2009, 7:38 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Next >>

Clevelands Forever!351Cleveland.net

Clevelands Forever!
351Cleveland.net