Ford 335 "Cleveland" Series Engine Forum: Streetable compression question

Return to Index

Streetable compression question July 6 2011 at 9:55 PM		(Login wildpny) Member from IP address 68.102.222.228


I have a 351c, the block has been 0 decked and flat top SRP pistons with -3cc dome volume. I am thinking about putting on Trick Flow heads that have 62cc chambers. Currently I am running a COMP cams Hydraulic Roller 236/240 at .050. My question is will this combination have too much compression to run on pump gas (91)?

Responses

Re: Streetable compression question - James K on Jul 6, 2011, 10:06 PM

Should be OK - Topham Lee on Jul 7, 2011, 1:27 AM

Compression..... - Adrian351 on Jul 9, 2011, 5:29 AM

Hopefully you meant a 3cc valve relief... - Brent Lykins, B2 Motorsports on Jul 9, 2011, 7:23 AM

dynamic compression - George Pence on Jul 9, 2011, 10:24 PM

I shoulda stayed in school - Travis on Jul 10, 2011, 7:25 AM

The cleveland head - Travis on Jul 10, 2011, 7:39 AM

Re: dynamic compression - Steve on Jul 10, 2011, 8:38 AM

Re: dynamic compression - mark on Jul 10, 2011, 8:53 AM

Re: dynamic compression - Steve on Jul 10, 2011, 9:17 AM

Re: dynamic compression - Mike on Jul 10, 2011, 10:11 AM