Return to Index  

A more aggressive cam will let you get away with a little more compression....

September 6 2011 at 9:33 AM
Brent Lykins, B2 Motorsports  (Login blykins)
Member
from IP address 72.4.3.130


Response to Re: 351C cylinder heads - squish and other issues

...however, it also shifts the hp/tq curves to the right, which in turn takes away from power on the bottom end. Of course if you keep shifting the curve to the right, then the cam puts the powerband up out of the range of the cylinder heads and you have a dog of an engine on both low and top ends.

Did you get your heads cc'd?

Brent Lykins
B2 Motorsports, LLC







 
 Respond to this message