Nice hp numbers for the Crane cam.
I won't see near those numbers however with a stock stroke 357 and iron heads...
Brent is working on specs now. It will probably be somewhere around 236 duration and 112 LSA. It will be mild as a solid roller goes but it will fit my existing equipment. The engine has lifter bore bushings with 0.046" oil holes. That wouldn't be big enough to run hydro roller lifters. I would have to pull the bushings, re-drill and reinstall. Not going to happen this time around.
My other engine will get the hydro roller as it doesn't have bushed lifters.
