+1January 17 2012 at 3:42 PM
|Brent Lykins, B2 Motorsports (Login blykins)|
from IP address 220.127.116.11
Response to Re: 4032 vs 2618 alloy
Probe (or even Diamond, Mahle, JE, etc.) forged pistons would be a great choice.
Don't worry about excessive clearances like some of the older forged pistons used to run. Forged pistons these days run around .0045-.006" clearance depending on the brand and material. Your cast stuff usually goes at around .0015-.002".
If your block has the correct clearances, you will not hear the forged pistons....I promise.
B2 Motorsports, LLC