Back from the dead..........problem solved......shame on holley!!!April 22 2012 at 5:22 PM
|Thomas (Login broncosaurus)|
from IP address 126.96.36.199
Response to yup
After messing with the pump cams and adustments i decided to order a 35 and 37 pump discharge nozzle and try those. When i went to pull the stock nozzle out and when i got it out it was a 25. I just assumed it has a 31 nozzle in it when i got it cause thats what the spec sheet in the box says. Shame on holley. The spec sheets say the 3310 is suppose to come from the factory with a 31 nozzle not a 25. I just knew thats what the problem was so for grins i went ahead and put the 37 in to see what happened. It didnt hesitate out of the hole with the 37 but when the main jets opened up it acted like it was flooding it. I got a the 31 nozzle that was suppose to come in it and the hesitation is gone and it runs great now. I guess buying a holley carb is like a box of chocolates, never know what your going to get. Thanks for all the help guys.
- 25 shooter - Miller Mylan on Apr 24, 2012, 4:52 PM