Return to Index  

It depends on two things....

May 17 2012 at 10:41 AM
Brent Lykins, B2 Motorsports  (Login blykins)
from IP address 72.4.3.130


Response to Hydraulic Roller Cams, Cast Steel vs Billet?

How high you wanna spin it and how much spring pressure you'll need to work with the cam. All of my cams are steel cores, even my hydraulic rollers. I run some decent spring pressures and just go ahead and get the billet cores.

Keep in mind that if you go with a steel cam, you have to run a steel/bronze/polymer distributor gear as well.

Brent Lykins
B2 Motorsports, LLC







 
 Respond to this message   
Responses