Return to Index

Pushrod / Rocker Arm Geometry

May 18 2012 at 8:16 PM

Dan (Login danorth)
Member
from IP address 24.10.122.9

Hi folks, I am the broken rocker arm guy. We have a new set of rocker arms(Comp Cams Ultra Pro Magnum ChromeMoly Roller Rockers 1630) and the shop would like to know the correct geometry so that they can work on checking for and ordering the proper set of pushrods. I had 8.300" pushrods. Does anyone have anything like that so I can provide it for the shop as they try to test for the correct length rod?

Thanks, Dan.

The previous thread:
http://www.network54.com/Forum/119419/thread/1335641357/Broken+Rocker+Arms

This message has been edited by danorth from IP address 24.10.122.9 on May 18, 2012 8:17 PM

Respond to this message

Responses

Re: Pushrod / Rocker Arm Geometry - GREG DAVIS on May 18, 2012, 8:36 PM

Re: Pushrod / Rocker Arm Geometry - Coupe3w on May 19, 2012, 10:00 AM

I agree with the other guys....take it somewhere else. n/m - Brent Lykins, B2 Motorsports on May 19, 2012, 10:40 AM

Same shop? - Quick XB on May 19, 2012, 12:23 PM

No... - Dan on May 19, 2012, 1:28 PM

I guess I don't understand..... - Brent Lykins, B2 Motorsports on May 19, 2012, 1:59 PM

Tell them! - Steve.k on May 19, 2012, 2:29 PM

All advice is welcome - Dan on May 19, 2012, 3:04 PM

Background... - Dan on May 19, 2012, 3:02 PM

Re: Background... - tinman on May 19, 2012, 3:36 PM

New... - Dan on May 19, 2012, 3:56 PM

If they do the test! - Steve.k on May 19, 2012, 4:50 PM

test - Quick XB on May 20, 2012, 5:19 PM

Pic and info - Mark McKeown on May 22, 2012, 1:17 PM