Bracket and buildSeptember 2 2013 at 5:11 AM
|russell (Login russxr67)|
from IP address 220.127.116.11
Response to Sexy beast
Trav, the bracket is available from Bullet cylinder heads here in Australia.
Builds is pretty typical of most stroker combinations.
Scat crank, rods and probe slugs 11.5 comp runs on 98 octane which is equivalent of your 93
CHI 208 heads and manifold. Heads have had some texturing of the intake ports but remain unported.
Bullet solid roller. Cam is under 260@50 . I'm not gonna give exact specs
Isky ezx lifters
Rollmaster chain setup
Yella terra platinum rockers
602 hp and 516 lbs of torque.
4200 converter , 3.9 gear ,10.94 quarter first time out.
Fwiw, I wouldn't use the Probes again. Seen too many of them crack . Mahle make a much nicer slug IMHO.
Sold the engine recently and about to do a 440 cube build using SCM race port heads.