as i was doing the headlight relay mod i noticed that the striped wires were only for the driver side headlight
they are thicker than the other wires going to the front of the car
the SOLID gray and SOLID green wire is for the passenger headlight
the green and green with stripe wire is for the low beams
the gray and gray with stripe is for the high beams
i just have the low beams on the relays right now because i didnt have the right connectors to plug both wires into 1 relay to jam both wires into a plug for the relay i would suggest using a yellow connector, makes it easy to disconnect and service if needed
78 1300 (Isabella)
~ Return to 'Son Of Xweb' here ~ 
Be sure to add yourself to Xweb's Registry and User Map
Return to > DF
