The specs are

Challenger
Sizes: 14x6 15, 23P
14x7 3p
PCD: Blank (can be drilled as PCD 98)
Offset: 3, 15, 23P
Colours: Charcoal
Weight: 6.7KG
Load Rating: 620

If I opt for the 14x6 with +15 offset, will there be enough clearance at the front?

Will 185/55-14 tires be ok for the front?

Thanks!
Vince

... cause the wheel pictured has 5 mounting holes ...

Or can they provide the same style of wheel 4 (moutning holes) x 98?

Else the wheel looks good - what's the color of the X?

thx

chrisE

and the wheels come un-drilled too

this is the website http://www.performancewheels.co.nz/performance.html

only problem i fear is clearance issue

Do you have more company info, who made etc.
those wheels it will looks awesome on your X'



Ricardo X19/79

by a company called Performance Alloys in Adelaide, South Australia.

http://www.performancewheels.com.au/alloywheels_classic.asp

They manufacture them with the correct 98PCD for X1/9's.

I have 2 sets of 13" rims on 2 of my X's with 185x60x13's. Both sets of rims had a similar problem. They were not centred on the hub and it took me over 2 years and many futile balances and alignments to discover this. The sterring wheel would shake at anything over modest speeds. Ultimately it was solved by manufacturing a simple plastic ring that sits on the hub and effectively centres the rim.

The 14's will rub on 185x60's or higher profile. They should be ok on a lower profile. Use the tirerack site to calculate the diameter required of 14's to match 185x60x13.

Good Luck






poppa X

Vince,

Here is the non-charcoal version...



I've since bought hub caps...



Regards,


Brian

Brisbane, Australia
1979 1300

Did you use any spacers on the X?

They look good!

Do you have to use centering rings?

I had a browse in the aussie performance website and they come in 13" x 5.5 too (but not sure about the offset)

Now I am very tempted, just waiting for the dealer to get back to me on the price...

Vince,

No spacers. No centre rings.

13 x 5.5.

Regards,


Brian

Brisbane, Australia
1979 1300

Vince,

nice options!

I would go with

7x14 offset 23 mm front (if available), and

7x14 offset 3 mm rear

with 195/45-14 all around. That would be a real sharp setup and would definitely fit!

Check these pics: this is 195/45-14 on 7" front and 8" rear. (you don't need to lower your car this much

http://project-x19.de/images/Schwarzwald_2007/images/dsc05708.jpg

http://project-x19.de/images/Schwarzwald_2007/images/dsc05711.jpg

http://project-x19.de/images/Schwarzwald_2007/images/dsc05713.jpg

 

Ulix
http://www.mirafiori.com/~ulix/x19

on 7x14 offset 26mm all around, 15mm spacers front, 20 rear.

http://project-x19.de/images/Schwarzwald_2007/images/dsc05852.jpg

Ulix
http://www.mirafiori.com/~ulix/x19

on 7x14" ?