Back Talk


Membership Required
Hit 'post' and follow the instructions

Lots to say? go to Horse Chat!..
Go to Swap Meet or Tech


How Do I submit a Feature or Tech article to THE HORSE???

Subscription Questions? Click Here

All posts subject to publication without notice


Smoke Out XV Forum

postviewsearchChat!
  • A link to CoC, more great Tom Fugle vintage EFMC pics . . .. on Mar 11, 2014, 3:51 PM
    • Wow--they refined the sissy bar!. on Mar 11, 2014, 9:03 PM
      • Or "redefined".... on Mar 11, 2014, 9:38 PM
    • Dig those ..... on Mar 12, 2014, 1:43 AM
    • most excellent!. on Mar 12, 2014, 2:43 AM
    • And I thought the knobby up front was something new...***. olsport on Mar 12, 2014, 12:51 PM
      • Nothing Is New. Jaded on Mar 13, 2014, 11:51 AM
        • +1*. NervousWreck on Mar 13, 2014, 4:09 PM
    • Thanks again Spud. on Mar 12, 2014, 5:04 PM
  • What is the correct name for the rubber things with a bolt out two sides?. on Mar 11, 2014, 10:03 AM
    • Lord Mounts. Fab Kevin on Mar 11, 2014, 10:12 AM
    • Or. brad on Mar 11, 2014, 10:30 AM
    • Thanks for the replies!. on Mar 11, 2014, 11:59 AM
    • for chain saws and chop saws. Sean on Mar 11, 2014, 12:31 PM
      • McMaster-Carr is your friend when it comes to this kind of stuff.*. on Mar 11, 2014, 12:52 PM
    • and another. . . what are the plastic screw terminal bosses . . .. on Mar 11, 2014, 2:58 PM
      • Try a body shop supply catalogue. They use a version of those square snap-in plugs. C.W. on Mar 11, 2014, 3:48 PM
        • You rule!!!! . . .. on Mar 11, 2014, 4:16 PM
    • What size do you need. I have ................... on Mar 11, 2014, 7:52 PM
      • I need four. on Mar 13, 2014, 10:17 AM
        • question. on Mar 13, 2014, 11:23 AM
  • OT. question for you guitar guys....... louis soto on Mar 11, 2014, 1:03 AM
    • Here's a link to more than you will probably want to know.... ScrapMetal on Mar 11, 2014, 2:22 AM
    • Here's a couple of my basses I had painted.. XsSpeed on Mar 11, 2014, 8:04 AM
    • tiger maple. Sean on Mar 11, 2014, 12:45 PM
      • I'm doing this right now. Sean on Mar 11, 2014, 2:53 PM
        • I didn't finish my sentence. Sean on Mar 11, 2014, 3:02 PM
        • Just shot this 5 minutes ago. Sean on Mar 11, 2014, 6:22 PM
        • hey sean, how did the deck go from natural to black to red?. on Mar 12, 2014, 1:21 AM
    • I use regular automotive paint. on Mar 11, 2014, 1:21 PM
    • I'd like to buy a maple Strat neck. on Mar 11, 2014, 1:22 PM
    • i could use a couple of bodies. can i buy them?. on Mar 12, 2014, 3:13 AM
    • Build it! Build as many as you can!!. on Mar 13, 2014, 12:46 AM
      • You all should really take him up on the offer...... on Mar 13, 2014, 6:11 PM
  • Got my Horse T-shirt today..... on Mar 10, 2014, 11:42 AM
    • The only magazine shirt I wear. I like it.... Axle on Mar 10, 2014, 1:55 PM
      • I never wear T shirts .... on Mar 10, 2014, 3:40 PM
        • I'll take it. axle on Mar 10, 2014, 3:50 PM
          • Then I'll order an XL. on Mar 10, 2014, 5:20 PM
            • Thanks, man!!!. on Mar 10, 2014, 8:47 PM
          • They're all XL! Just got mine today too.... Vic on Mar 10, 2014, 8:49 PM
  • Blue Monday with video. horshak on Mar 10, 2014, 11:41 AM
    • embedded for you. on Mar 10, 2014, 12:44 PM
      • what do I do to embed something?. horshak on Mar 10, 2014, 2:34 PM
        • Re: what do I do to embed something?. on Mar 10, 2014, 3:37 PM
          • thanks again this is the 2nd time you helped me with this, I'm printing it now*. horshak on Mar 10, 2014, 4:18 PM
            • No worries .... on Mar 10, 2014, 5:21 PM
  • Found this lil' item to be useful...,maybe. SHOVELSTEIN on Mar 10, 2014, 10:50 AM
    • interesting gimble concept.... HYspd on Mar 10, 2014, 11:03 AM
    • that was pretty cool!. louis soto on Mar 10, 2014, 2:36 PM
    • that was cool*. on Mar 10, 2014, 2:36 PM
    • Curious minds want to know.... on Mar 10, 2014, 7:59 PM
    • The builder of that table... crank yanker on Mar 11, 2014, 6:45 AM
  • Cerakote. Hammer on Mar 9, 2014, 6:49 PM
    • I've been looking into it also.. on Mar 9, 2014, 9:37 PM
      • Re: I've been looking into it also.. on Mar 9, 2014, 10:45 PM
        • post up when your ready. on Mar 10, 2014, 6:09 AM
    • I've seen some pretty cool finishes done with this process>. on Mar 9, 2014, 10:18 PM
    • The place that does my ceramic exhaust coatings does Caercote.... on Mar 9, 2014, 11:12 PM
      • I have no idea why I kept spelling Ceracote wrong, sorry *. on Mar 9, 2014, 11:17 PM
        • Maybe.... on Mar 10, 2014, 8:09 AM
          • Maybe Eman, or maybe it was hit & run dyslexia.....*. on Mar 10, 2014, 11:10 AM
      • That is one sexy motor. on Mar 10, 2014, 3:55 PM
  • Sewing Machines. on Mar 9, 2014, 5:23 PM
    • Item # 7. Fuzzy on Mar 9, 2014, 5:42 PM
    • Amen on #6.... on Mar 9, 2014, 7:35 PM
    • #7...... tom whitfield on Mar 9, 2014, 9:14 PM
    • did you get to ride any of the new small watercooled bikes. ratbike.org on Mar 10, 2014, 6:12 AM
      • Actually,. on Mar 10, 2014, 12:08 PM
        • Were you able to confer with a Chrome Consultant?. on Mar 10, 2014, 2:06 PM
          • As a matter of fact, yes I did but. on Mar 10, 2014, 2:54 PM
            • Don't know if you rehearsed that or not, but you should. Fonzo on Mar 10, 2014, 3:29 PM
            • Dude, That's hilarious!*. on Mar 11, 2014, 1:31 AM
    • No. 6 and 7 but will probably buy a new..... horshak on Mar 10, 2014, 11:58 AM
    • Amen on #4 & #5 --- Harley hasn't built a decent-looking Sportster since the ironhead.*. on Mar 10, 2014, 3:39 PM
      • And even then they peaked with the 74..... ironheadcharlie on Mar 11, 2014, 11:29 AM
        • And you KNOW this! *. on Mar 11, 2014, 12:54 PM
    • yea but, you can ignore your BOSS!. Sean on Mar 14, 2014, 3:02 PM
  • Intake Ideas. Operater on Mar 9, 2014, 10:57 AM
    • I have in the pass about 3 years go it's fairly easy to do...hard part is what. on Mar 9, 2014, 12:35 PM
    • Just for cool?. on Mar 9, 2014, 1:12 PM
      • Re: Just for cool?. Operater on Mar 9, 2014, 1:29 PM
        • Nothing wrong with that. on Mar 9, 2014, 2:07 PM
    • seen a few, usually with a bigass SU carburettor. ratbike.org on Mar 9, 2014, 1:39 PM
    • single. inline4 on Mar 9, 2014, 2:37 PM
      • Re: single. on Mar 10, 2014, 2:31 PM
    • 2 into 1 for GS550. on Mar 9, 2014, 6:16 PM
    • My friend put a single CV on his CB750.... Jason-NH on Mar 10, 2014, 8:27 AM
    • you can weld or have welded........ J.D. in FL on Mar 10, 2014, 10:25 AM
    • yea. Sean on Mar 14, 2014, 11:11 AM
  • Chopping a sport bike question. on Mar 9, 2014, 8:59 AM
  • FTW.... on Mar 8, 2014, 9:51 PM
    • Hmm. Never heard that version. 8082 on Mar 8, 2014, 11:11 PM
      • Didja see definition #2?. on Mar 9, 2014, 12:07 AM
        • Now I did. on Mar 11, 2014, 4:23 PM
    • church of choppers sez, Forever Two Wheels*. horshak on Mar 9, 2014, 9:50 PM
    • didn't see one I looked for...... on Mar 10, 2014, 3:04 PM
      • I want to meet that chick immediately. :) *. on Mar 10, 2014, 3:46 PM
        • I'm with you Ivan..... on Mar 10, 2014, 7:46 PM
        • Oh yea, those girls are fun. Crazy, but fun..... on Mar 11, 2014, 11:35 AM
  • Image upload service. on Mar 8, 2014, 3:13 PM
    • Funny you should have this upload svc info here today... on Mar 8, 2014, 8:15 PM
      • Let me know how it works out. on Mar 9, 2014, 2:11 PM
  • thanks for the advice on fork caps fellas........ on Mar 7, 2014, 8:42 PM
  • try again. on Mar 7, 2014, 8:11 PM
  • Hayes Carll music. on Mar 7, 2014, 7:38 PM
    • Arrrrrgh! Those lyrics make sense!!!. on Mar 7, 2014, 9:35 PM
    • Excellent!. 8082 on Mar 7, 2014, 10:46 PM
    • I loved it.... on Mar 8, 2014, 3:03 AM
    • I like it !. on Mar 8, 2014, 6:17 PM
  • Of course, the lyrics are stupid...but who CARES? It's FRIDAY, FudderMuckers!!!. Axle on Mar 7, 2014, 4:04 PM
    • I want her to do bad things to me..... on Mar 7, 2014, 6:51 PM
      • hot. inline4 on Mar 7, 2014, 7:11 PM
      • LMAO!*. Axle on Mar 7, 2014, 7:31 PM
    • I have trouble watching videos like that.... on Mar 8, 2014, 8:18 AM
    • Did Steven Tyler get a tit job? help me out here.... mr. z on Mar 8, 2014, 6:23 PM
  • Anyone know what issue the Baker tin type primary was reviewed in?. Keith Andrews on Mar 7, 2014, 2:09 PM
    • Yeah.... on Mar 7, 2014, 4:17 PM
      • Thanks!. on Mar 7, 2014, 4:32 PM
      • God! What a hot cover model!!!*. on Mar 7, 2014, 7:35 PM
    • oh man.... you getting one?. Reaver on Mar 7, 2014, 5:45 PM
      • Helping an old dude. on Mar 10, 2014, 7:32 PM
  • so we got a request on FB~. klla on Mar 7, 2014, 12:07 PM
    • Cool! Garage makes a good backdrop too.*. Vic on Mar 7, 2014, 1:00 PM
    • Hey man that's bitchin', badass AND kul as hell . . .. spuddley on Mar 7, 2014, 1:20 PM
    • guess I'm getting old, your bike looks better than the model does*. horshak on Mar 7, 2014, 1:44 PM
      • Re: guess I'm getting old, your bike looks better than the model does*. on Mar 7, 2014, 5:55 PM
        • What I am digging on is the crispness of the shots and fine degree of resolution. C.W. on Mar 7, 2014, 9:23 PM
          • Yep, that makes me want to upgrade my meager camera shit. on Mar 7, 2014, 10:54 PM
    • thanx guys~. on Mar 7, 2014, 10:35 PM
    • Very cool!. RidingDonkeys on Mar 9, 2014, 9:57 AM
  • Taking a '56 BSA to Bonneville. . .. on Mar 7, 2014, 9:51 AM
    • Very cool... on Mar 7, 2014, 10:12 AM
      • I saw her's too . . .. on Mar 7, 2014, 3:01 PM
    • jason. jbfrmca on Mar 7, 2014, 11:36 AM
      • Great idea, John . . .. on Mar 7, 2014, 2:59 PM
    • Grate video. hemdawg on Mar 7, 2014, 1:19 PM
      • great*. hemdawg on Mar 7, 2014, 1:24 PM
    • Do my vote, I wanna vote for ya but don't do facebook*. on Mar 7, 2014, 1:49 PM
      • Doesn't require FB. Link is to Champion website . . .. on Mar 7, 2014, 2:13 PM
    • signed up at champion web site and voted*. on Mar 7, 2014, 2:33 PM
      • Thank you, Horshak! **. on Mar 7, 2014, 3:00 PM
    • He's got my vote.... on Mar 7, 2014, 11:53 PM
    • He got my vote..... Good luck!!!. on Mar 8, 2014, 3:16 AM
    • very cool.... on Mar 9, 2014, 11:11 AM
    • I just saw this!. Axle on Mar 9, 2014, 9:13 PM
  • Not sure where to post this...... on Mar 7, 2014, 1:02 AM
    • Found out my springer is an AEE...... on Mar 7, 2014, 6:42 PM
  • anybody know (on the quick!)........ louis soto on Mar 6, 2014, 10:13 PM
    • No, they're regular thread........ on Mar 6, 2014, 10:20 PM
      • cool thanks, i will........... on Mar 6, 2014, 11:08 PM
        • Curious.... on Mar 7, 2014, 4:53 PM
          • Bull Dawson. you disassemble them and.......... louis soto on Mar 7, 2014, 8:29 PM
            • Yeah, I get that part.... on Mar 7, 2014, 9:40 PM
              • i'll check the travel before i final commit. thanks for heads up.. on Mar 7, 2014, 10:23 PM
    • been there. bunk on Mar 6, 2014, 11:10 PM
    • top nuts. on Mar 6, 2014, 11:38 PM
      • ???????. larrytintexas on Mar 7, 2014, 8:06 AM
        • I would imagine... on Mar 7, 2014, 9:46 AM
    • you need the right tool..pic... on Mar 7, 2014, 2:28 PM
  • May not mean much--Krylon #3370 has been discontinued, but Duplicolor says.... Axle on Mar 6, 2014, 3:36 PM
    • VHT, I've had great exprience with their stuff including . . .. spuddley on Mar 6, 2014, 4:44 PM
    • Krylon swapped to the VHT too.*. corn on Mar 6, 2014, 6:05 PM
    • I hadn't heard that..... on Mar 6, 2014, 9:48 PM
      • Told today by the good people at True Value Hardware.... Axle on Mar 6, 2014, 10:14 PM
        • I used to buy it at my Ace Hardware....*. on Mar 6, 2014, 10:21 PM
          • Yes!!! And, I know where some is.... on Mar 6, 2014, 10:49 PM
            • There is no disturbance in the force. Katya Kakhov on Mar 7, 2014, 11:47 PM
              • Thanks! I will check that out.*. on Mar 8, 2014, 12:17 AM
  • To protect and serve.......... on Mar 6, 2014, 10:48 AM
    • well if all things are equal, this POS will be convicted of a felony and then fired. But... carl on Mar 6, 2014, 1:49 PM
    • This POS is seriously mentally disturbed..... on Mar 6, 2014, 4:59 PM
      • Psych test. on Mar 8, 2014, 11:57 AM
        • That's one hell of a scary thought.*. on Mar 8, 2014, 3:24 PM
    • If I did this, I would have to kiss my.... Tony on Mar 7, 2014, 1:51 AM
  • Need Opinions - Air shock/Air Bag. on Mar 5, 2014, 4:41 PM
    • The rock Sjox is adjustable for both compression and rebound using the two air valves.. C.W. on Mar 5, 2014, 5:41 PM
      • this topic is somewhat covered 4-5 threads down.....i was askin about those airbags too. aaron on Mar 5, 2014, 6:02 PM
        • lol..sorry..just seen u started that one too...... on Mar 5, 2014, 6:03 PM
      • Couldnt Deciede,. Don "Ho" on Mar 5, 2014, 6:25 PM
    • Have owned several. Tasche on Mar 5, 2014, 10:59 PM
      • Not to mention they put out way to much volume..... on Mar 11, 2014, 12:02 PM
  • Hack Journalism. on Mar 5, 2014, 3:15 PM
    • fixed it.. on Mar 5, 2014, 3:31 PM
    • no caption but i'd be jumping like that too if it were my bike!! nice. louis soto on Mar 5, 2014, 11:11 PM
      • dooooh! sorry meant for post below!. on Mar 5, 2014, 11:15 PM
  • Caption, please. on Mar 5, 2014, 1:31 PM
    • too kool for school! just me and the Fonz! HEY!. on Mar 5, 2014, 1:43 PM
    • Caption?! I am dumbstruck by the beauty of the bike!. Paul Bradford on Mar 5, 2014, 1:48 PM
      • +1.... Don "Ho" on Mar 5, 2014, 4:55 PM
    • hmmm, maybe those seat springs need some damping after all *. ratbike.org on Mar 5, 2014, 1:55 PM
    • "Man jumps rigid Panhead at airstrip!!!!... and lives!!". on Mar 5, 2014, 2:09 PM
    • "Riding invisible swing....you're doing it right.". Reaver on Mar 5, 2014, 2:15 PM
    • Life will never be the same since.... Tony on Mar 5, 2014, 2:28 PM
    • One giant leap for pankind.. on Mar 5, 2014, 3:10 PM
    • Bwahahaha! I have to give this one to Hacksaw....... on Mar 5, 2014, 4:45 PM
    • the original jump start. willie on Mar 5, 2014, 5:43 PM
    • Where the fuck is my jet pack?. on Mar 5, 2014, 9:45 PM
    • Ayyy!*. Tony on Mar 6, 2014, 5:26 AM
    • You might be a Douche Bag if. Operater on Mar 6, 2014, 6:34 AM
    • You fool Richie Pans going to kick your ass*. on Mar 6, 2014, 11:43 AM
    • note to self retard ignition. sawdoff on Mar 6, 2014, 12:47 PM
    • white men can jump. mike davis on Mar 6, 2014, 1:31 PM
    • a leap of faith. oldtimer on Mar 6, 2014, 3:41 PM
    • Ooohh what a feeling....... on Mar 6, 2014, 4:43 PM
    • Where the fuck is my jet pack?. on Mar 6, 2014, 8:06 PM
  • Off the wall question, but does anyone know of a good source..... on Mar 5, 2014, 1:26 PM
    • try wentworth aircraft... crank yanker on Mar 5, 2014, 1:45 PM
      • Thanks, I just sent them a request. Don't know if a wing light will. ironheadcharlie on Mar 5, 2014, 2:04 PM
        • I Ran 1-million candlepower aircraft landing lights in the bumper. Fonzo on Mar 5, 2014, 2:19 PM
        • Several styles... on Mar 5, 2014, 2:39 PM
          • I want something sleek to mount to the fender instead of the usual. on Mar 5, 2014, 10:37 PM
          • That's red for port and green for starboard . . . . .. sailor spuddley on Mar 6, 2014, 12:50 PM
  • WTF. on Mar 5, 2014, 11:32 AM
    • the post just said she was "pissed" after buying another bike..... carl on Mar 5, 2014, 11:49 AM
    • One word, Hyperbole!. on Mar 5, 2014, 12:53 PM
      • still seems to be a large number of HD's stashed in garages by the "kool kidz".. on Mar 5, 2014, 1:39 PM
    • At least its a good deal*. Jessechop on Mar 5, 2014, 1:23 PM
    • I'm embarrassed... on Mar 5, 2014, 2:41 PM
    • The motor alone is $7195 new from S&S. on Mar 5, 2014, 2:42 PM
    • I have 12 bikes the wife never get piss if I buy another bike but she will ask. Mr Miyagi on Mar 5, 2014, 3:31 PM
  • Hot off the mallet...... on Mar 5, 2014, 6:52 AM
    • My wallet! !!. on Mar 5, 2014, 7:14 AM
      • Thank you very much! I greatly appreciate it!. on Mar 5, 2014, 7:42 AM
  • Who will be on the Horse ride Wed. and at Willie's Thurs. next week?. on Mar 5, 2014, 4:37 AM
    • I am, I try to be at the Boothill,. on Mar 5, 2014, 6:03 AM
    • ME!*. on Mar 5, 2014, 11:59 AM
    • I'll be there..... on Mar 5, 2014, 3:20 PM
      • hahaha I'll drink for you en Kevin...... on Mar 6, 2014, 3:33 AM
  • Racing against the clock..... on Mar 4, 2014, 9:31 PM
  • jp cycles suck!. on Mar 4, 2014, 7:20 PM
    • Re: jp cycles suck!. Dude, I totally forgot my name on Mar 4, 2014, 10:20 PM
    • Why do you write that? *. spuddley on Mar 5, 2014, 7:29 AM
    • Did you get a bad deal?. Axle on Mar 5, 2014, 10:17 AM
    • I have had good dealings with them.. john altavilla on Mar 5, 2014, 11:10 AM
      • +1*. horshak on Mar 5, 2014, 12:53 PM
        • +2*. NervousWreck on Mar 6, 2014, 12:32 PM
    • i ordered a super b filter for daytona. spacey on Mar 5, 2014, 4:33 PM
      • send pics of those white n green bags n faring. on Mar 5, 2014, 8:27 PM
      • I've heard of this before J&P....... horshak on Mar 6, 2014, 7:22 PM
    • The only thing that sucks with J&P is their high retail pricing.... on Mar 6, 2014, 7:14 AM
      • That, and selling factory 2nds, blems, and customer returns at full retail price as new **. on Mar 6, 2014, 2:43 PM
      • Good "go to" catalog with everything... Jason-NH on Mar 6, 2014, 8:01 PM
  • In the back of the latest edition, under the "Running Free" section, is a Kaw long bike.... on Mar 4, 2014, 1:58 PM
    • The result of..... on Mar 4, 2014, 2:06 PM
      • LMAO!*. on Mar 4, 2014, 2:39 PM
  • XsSpeed's Chopper. on Mar 4, 2014, 1:29 PM
    • thanks man. XsSpeed on Mar 4, 2014, 1:55 PM
      • Well, you work hard at it. And I have to say that every bike I have seen from you.... on Mar 4, 2014, 2:03 PM
        • Wow thats real cool. XsSpeed on Mar 4, 2014, 2:45 PM
          • Dude that's sweet..... on Mar 4, 2014, 3:18 PM
            • Thanks!. on Mar 4, 2014, 4:05 PM
          • There ya GO; I'm likin' that purple psychadelic choppa bunches meself! *. spuddley on Mar 4, 2014, 3:57 PM
            • thanks man*. on Mar 4, 2014, 4:20 PM
          • Are those pipes square??. Dude, I totally forgot my name on Mar 4, 2014, 3:57 PM
            • yep. on Mar 4, 2014, 4:19 PM
              • It's the L7 Exhaust!*. on Mar 4, 2014, 6:23 PM
          • Right on!. on Mar 4, 2014, 10:27 PM
    • i sat on it in at willie's when XsSpeed wasn't looking!. on Mar 4, 2014, 7:22 PM
      • As long as you didn't sniff the seat. XsSpeed on Mar 4, 2014, 9:37 PM
        • haha! *. on Mar 5, 2014, 4:33 PM
    • The paint job leads me back to my old question.... on Mar 4, 2014, 8:23 PM
      • grape krush. on Mar 4, 2014, 9:38 PM
    • I'm with you on that! Nice one Speedy!. on Mar 4, 2014, 10:28 PM
      • HaHa yea I remember that fondly. on Mar 4, 2014, 10:39 PM
  • Where's the count down clock?. hemdawg on Mar 4, 2014, 11:32 AM
    • You ride that bitch in the ice this morning?. on Mar 4, 2014, 7:17 PM
  • Attended a AHRMA.... on Mar 4, 2014, 10:32 AM
    • look me up at NOLA. spanner on Mar 4, 2014, 5:06 PM
      • I'll be looking forward to meeting you.. on Mar 4, 2014, 7:27 PM
      • Spanner where is home for you?. JimT on Mar 7, 2014, 8:40 AM
  • thank you. on Mar 4, 2014, 12:22 AM
  • Got a new project..... on Mar 3, 2014, 11:46 PM
    • Nice! My friend is doing a '60 1/2 ton this winter...... Jason-NH on Mar 4, 2014, 7:57 AM
    • Cool project.... on Mar 4, 2014, 8:27 AM
    • i got a `63 sittin~. on Mar 4, 2014, 10:02 AM
    • Cool project. on Mar 4, 2014, 8:16 PM
    • 60 was my first pickup. Fatvo55 on Mar 4, 2014, 9:37 PM
  • took a trip to Kentucky meet & interesting man. PSYCHOSCOTTY on Mar 3, 2014, 8:34 PM
    • Trip of a lifetime!. on Mar 3, 2014, 9:30 PM
  • Elbow grease.... on Mar 3, 2014, 12:41 AM
    • Lookin' good..... on Mar 3, 2014, 2:35 AM
      • I'm just going white and black.... on Mar 3, 2014, 10:29 AM
    • Thr reward of a thing well done is to have done it. Good job*. NervousWreck on Mar 3, 2014, 8:51 AM
    • Takes a long time, but very rewarding when done . . .. spuddley on Mar 3, 2014, 9:52 AM
    • Bench Grinder may be a good Investment. Operater on Mar 3, 2014, 10:14 AM
      • Yep.... on Mar 3, 2014, 10:31 AM
      • Double yep. I like a wire wheel for that brushed aluminum look*. NervousWreck on Mar 3, 2014, 10:57 AM
    • Looks real nice, its those small details that make the bike....... ironheadcharlie on Mar 4, 2014, 10:42 AM
      • Agreed.... on Mar 4, 2014, 11:08 AM
  • Cheap parts (kind of a continuation of the below thread re: Taiwan Ted and Chinese parts). on Mar 2, 2014, 4:16 PM
    • And I believe it will be a China made boot.. on Mar 2, 2014, 4:35 PM
      • Bawahahahah......China made boot! Good one*. NervousWreck on Mar 2, 2014, 4:45 PM
      • LOL! Sad but true.***. on Mar 2, 2014, 6:33 PM
    • Go to a swap meet... Huck on Mar 2, 2014, 7:23 PM
      • That's a good idea.. on Mar 2, 2014, 9:05 PM
      • Buy used parts. on Mar 2, 2014, 11:36 PM
    • Check this cat out. 8082 on Mar 2, 2014, 7:41 PM
      • Images didn't come through.. on Mar 2, 2014, 9:06 PM
      • Sorry 'bout that. 8082 on Mar 3, 2014, 9:48 AM
        • lots of good stuff there. thanks! ***. on Mar 3, 2014, 10:37 AM
    • You raise a good point. Flynch on Mar 2, 2014, 8:09 PM
      • Buy local, save a Nation. on Mar 2, 2014, 8:46 PM
      • I agree with everything you're sayin' but. on Mar 2, 2014, 9:17 PM
        • Made In America parts catalog.... on Mar 3, 2014, 2:04 PM
          • How. on Mar 3, 2014, 2:20 PM
            • Thanks Bull, I've never noticed it either...... on Mar 3, 2014, 4:31 PM
    • Support the hole in the wall American ..... Jason-NH on Mar 2, 2014, 8:59 PM
    • Taiwan quality. on Mar 3, 2014, 4:06 AM
    • Why cant they sell cheap but sell more?. Jason-NH on Mar 3, 2014, 7:32 AM
      • Have you ever started a business?. on Mar 3, 2014, 1:33 PM
        • Very true. on Mar 3, 2014, 3:00 PM
        • Well, I see no one else has guessed so let me!. Paul Bradford on Mar 3, 2014, 6:30 PM
          • You have a good brain. on Mar 3, 2014, 6:42 PM
    • Can't complain about their women, 11 years 18th of this month...... NervousWreck on Mar 3, 2014, 8:27 AM
    • Paughco. larrytintexas on Mar 3, 2014, 8:51 AM
      • And Milton. Katya Kakhov on Mar 3, 2014, 11:13 AM
    • I went through this trying to buy a hammer drill. on Mar 3, 2014, 2:55 PM
      • Don't know if Bosch is available to you but they did make a good hammer drill. Remember. C.W. on Mar 3, 2014, 5:26 PM
        • They were all made in China too.. on Mar 4, 2014, 9:05 AM
      • Ya got my curiosity up. Went trough some of my old tools...... NervousWreck on Mar 3, 2014, 5:33 PM
        • Like the Rabbit sez, "Ehhh, Could be.". C.W. on Mar 3, 2014, 7:06 PM
        • 30 years ago. on Mar 4, 2014, 9:08 AM
    • Built my last chop all Chinese...... Jason-NH on Mar 3, 2014, 8:08 PM
      • Next question for Jason. on Mar 3, 2014, 8:40 PM
        • Isn't that what all the auto manufactures, Gun ...... Jason-NH on Mar 3, 2014, 9:01 PM
          • No, thats not what the 'cloths' manufacturers do. on Mar 3, 2014, 9:12 PM
          • You are rationalizing your support of a thief.... RA on Mar 3, 2014, 11:21 PM
            • They are crippled......... on Mar 4, 2014, 12:37 AM
              • Yeah, but. on Mar 4, 2014, 2:30 PM
  • Anyone Use the TC BROs Air-Bag?. Don "Ho" on Mar 2, 2014, 12:01 PM
    • I've been using a single on my Stampede bike for years before TCBros came out with there. on Mar 2, 2014, 12:23 PM
    • +1.... on Mar 2, 2014, 12:37 PM
    • Thanks gentlemen Just what I was looking for.. Don "Ho" on Mar 2, 2014, 1:34 PM
      • question ive been checkin those out for the ole ladys rigid... aaron on Mar 2, 2014, 2:47 PM
        • that is more dependant on the seat hinge you use*. Fab Kevin on Mar 2, 2014, 2:52 PM
          • well i can attest FK seat hinges are the best i ever used.. on Mar 2, 2014, 8:29 PM
          • +1.... on Mar 3, 2014, 12:21 AM
            • well, thank you guys*. on Mar 5, 2014, 8:32 AM
    • Bags. on Mar 2, 2014, 5:44 PM
      • psyclenutt,, you got any info on those airbags??. on Mar 5, 2014, 1:37 PM
  • another cool old video. on Mar 1, 2014, 9:48 PM
    • and one for Englishman. on Mar 1, 2014, 10:04 PM
      • Strange music choice..... on Mar 2, 2014, 9:24 AM
        • the Mods or the Rockers*. on Mar 2, 2014, 5:03 PM
    4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 

    << Prev Next >>