My pond dimensions are 9ft x 9ft x 5ft deep.
I have a 4" bottom drain with build in air diffuser and wall skimmer, all feeds a nexus easy 200, through a Proclear 55 watt UV and fed back into pond via a mid water return and hopefully a water fall.
The concrete base is running slightly away to one of the corners so I will need to bench the floor back towards the drain. Is there a typical mix or is it open to debate, I have seen people us fibres but I’m unsure as to what way to go.
Any help / suggestions would be much appreciated.
A few people have said to me about the foam walls for fibre glassing as they are a better option, is the cost greatly increased?
Thanks in advance
Dave.
Posted on May 22, 2008, 10:32 AM from IP address 81.143.130.76