http://www.reincarnation-automotive.com/Duraspark_distributor_recurve_instructions_index.html




Regards,
Scott Johnston / RHP
http://www.reincarnation-automotive.com

Complete list of product and services:
http://www.reincarnation-automotive.com/products_index.html

http://www.fordracingparts.com/download/instructionsheets/FordInstShtM-12390-A.pdf

"Enlightened statesmen will not always be at the helm" ~ James Madison

http://www.cobralads.com/2006/04/why_sb_ford_dis.html

"Enlightened statesmen will not always be at the helm" ~ James Madison

http://www.msdignition.com/instructions/Products/Tech_Info/gear_install_frm28590.pdf?terms=distributor+gear

"Enlightened statesmen will not always be at the helm" ~ James Madison

in case the Reincarnation page ever gets 'lost'...

To figure approximate slot width for a given advance figure Multiply the number of desired centrifugal degrees by .013" then add .150" to account for the width of the stop pin.

8L slot = 16 degrees centrifugal advance = .358"
9L slot = 18 degrees centrifugal advance = .384"
10L slot = 20 degrees centrifugal advance = .410"
11L slot = 22 degrees centrifugal advance = .436
12L slot = 24 degrees centrifugal advance = .462"
13L slot = 26 degrees centrifugal advance = .488"
14L slot = 28 degrees centrifugal advance = .514


"Enlightened statesmen will not always be at the helm" ~ James Madison