I found some chrome pin stripe at Advance Auto,Very cheep. You can put it on your console where the chrome ridges have turned white.
Remove the top cover around the shifter by taking out 2 screws at the ash tray. If the black paint is flaking, rub it with fine steel wool and get it all off. then paint the whole thing with Krylon Semi Flat paint. Take the chrome pin striping and put it on the top of the flat ridges. You can't make turns only straight runs. Cut it with a razor blade at the corners and splice it.
Then trim around the full length of it with a razor blade using the sides of the ridge as a guide. It will look brand new. I tryed this on the instrument cluster, but it won't work there . It won't make any turns only straight lines.
Posted on May 30, 1999, 3:13 PM from IP address 12.21.242.41