Building a cpu with a barebone, cd-rom, HD, and ram etc.
I have put a floppy, HD, CD-ROM, and ram chip in the M7VIG barebone and has a 2200 mhz cpu already attached to the motherboard.
When I turn it on the fans run and no display on the monitor, and do not know what to do. If I could get a screen I would be in the right direction.
I tried to reset the CMOS to see if it would pick up the monitor or motherboard.
The manuel says for the jumper to be on 1 and 2.
It does not run at all with it on what I think is 1 and 2 but will start up on 2 and 3 except no display etc. as I said above.
Help
|