Return to Index  

Yes if you have sanded and polished it out

April 20 2017 at 4:33 PM
Scotty Battistoni  (Login mrcockpit1)
HyperScale Forums
from IP address

Response to How about dipping the canopy prior to paint??

on both sides...

The one thing to remember is all silicone's leach a little siloxane onto each and every rein part. That's how silicone works until it dries out. So unless you find a way to completely strip and siloxane off of the canopy the Future will more than likely fisheye.

Lightly sanding both side with 1000 or higher grit then Windex wipe it a couple of times should do it.. We have not had Future come off of our resin parts here at the office. And I have done some pretty rigorous taping on some of them.
Also make sure none of the polishing wax compound does not leave a greasy film before future.. In fact you may not even need to polish if you are going to use a future wax dip.

Scotty B

 Respond to this message   

Posting or replying to messages on Plane Talking requires visitors to register:

  1. First you will need to register with Network 54, the Forum provider. Click here to register with Network 54. (If you already have a Network 54 Login you can go straight to the next step)
  2. Then, while signed in to Network 54, you can sign up for HyperScale's forums. Click here to sign up for HyperScale's forums.

Your user name and password will give you full posting privileges to all of HyperScale Forums.

Please note the following conditions of posting:

All contributions are welcome but please refrain from political or abusive comments, racially or religiously offensive remarks, swearing (including the thin disguising of swear words with asterisks and other characters), insulting language and crude metaphors. Please do not use Plane Talking as a public platform to complain about retailers or manufacturers (about issues such as broken or missing parts) before you have followed all normal channels to resolve any greivance. Plane Talking is not the place to conduct personal feuds or for posting personal attacks. Please do not post in capital letters only, as this is considered to be shouting and therefore impolite. Also, please do not post in 'texting message' word format. Any posts breaching these guidelines will promptly be removed from the server and the offender may be excluded from further posting to the HyperScale Forums. Off-topic posts may also be removed from the server.

In addition, Plane Talking is not a forum for the public criticism of the models that appear as Galleries or Articles. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.

Finally, please note that this Discussion Group is privately operated and that I reserve the right to delete any post or cancel any registration for any reason whatsoever.

free counters