Return to Index  

Bernard Payne....OS2U float, struts & bomb rack hole locations.....

June 18 2017 at 1:32 PM
Larry Goodell  (Login peebeewhy)
HyperScale Forums
from IP address

using a 6" st'stl rule, here's what I came up with. lay your wing out with a fine pointed No. 2 pencil or your favorite method. I based all the horz. measurements squared off the panel line that runs all the way across the wing root. Not the one inside of that that curls toward the panel line I'm referencing. All vert. measurements are taken from the bottom trailing edge. This is the st'bd bottom wing shown...I would assume both would be identical.
I recommend probing with a sharp pointed tool to see if measurements are true before drilling. A sharp pointed tool should poke through the thin plastic where you'll know that is indeed a
hole location. Hope this helps my friend........I added the trailing edge measurements again in case some are difficult to discern. The 3/4" and two 7/8" measurements are the distances between the holes vertically.
[linked image]

This message has been edited by peebeewhy from IP address on Jun 18, 2017 1:36 PM

 Respond to this message   

Posting or replying to messages on Plane Talking requires visitors to register:

  1. First you will need to register with Network 54, the Forum provider. Click here to register with Network 54. (If you already have a Network 54 Login you can go straight to the next step)
  2. Then, while signed in to Network 54, you can sign up for HyperScale's forums. Click here to sign up for HyperScale's forums.

Your user name and password will give you full posting privileges to all of HyperScale Forums.

Please note the following conditions of posting:

All contributions are welcome but please refrain from political or abusive comments, racially or religiously offensive remarks, swearing (including the thin disguising of swear words with asterisks and other characters), insulting language and crude metaphors. Please do not use Plane Talking as a public platform to complain about retailers or manufacturers (about issues such as broken or missing parts) before you have followed all normal channels to resolve any greivance. Plane Talking is not the place to conduct personal feuds or for posting personal attacks. Please do not post in capital letters only, as this is considered to be shouting and therefore impolite. Also, please do not post in 'texting message' word format. Any posts breaching these guidelines will promptly be removed from the server and the offender may be excluded from further posting to the HyperScale Forums. Off-topic posts may also be removed from the server.

In addition, Plane Talking is not a forum for the public criticism of the models that appear as Galleries or Articles. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.

Finally, please note that this Discussion Group is privately operated and that I reserve the right to delete any post or cancel any registration for any reason whatsoever.

free counters