Return to Index  

Airbrush (Grex) user issue - needle insertion resistance

February 13 2018 at 8:24 AM
Pete R.  (Login petepr)
HyperScale Forums
from IP address

I'm using a Tritium TG, which I only mention in case there is anything specific that I'm doing wrong. I'm getting serious resistance when I re-insert the needle and which is inevitably bending the tip of the needle. The resistance starts sometime after the tip of the needle has gone past the far (i.e. closest to the nozzle) side of the bottom of the paint cup. I thought it was somewhere between there and the start of the nozzle, but now I'm not so sure. I tried inserting the needle with the nozzle removed, and I get no resistance, which suggests the needle is hitting the back end of the nozzle, although given the straight-through alignment, I don't see how that could be the case. The nozzle is clean; no obstructions.

Any ideas.

Thanks, Pete R.

 Respond to this message   

Posting or replying to messages on Plane Talking requires visitors to register:

  1. First you will need to register with Network 54, the Forum provider. Click here to register with Network 54. (If you already have a Network 54 Login you can go straight to the next step)
  2. Then, while signed in to Network 54, you can sign up for HyperScale's forums. Click here to sign up for HyperScale's forums.

Your user name and password will give you full posting privileges to all of HyperScale Forums.

Please note the following conditions of posting:

All contributions are welcome but please refrain from political or abusive comments, racially or religiously offensive remarks, swearing (including the thin disguising of swear words with asterisks and other characters), insulting language and crude metaphors. Please do not use Plane Talking as a public platform to complain about retailers or manufacturers (about issues such as broken or missing parts) before you have followed all normal channels to resolve any greivance. Plane Talking is not the place to conduct personal feuds or for posting personal attacks. Please do not post in capital letters only, as this is considered to be shouting and therefore impolite. Also, please do not post in 'texting message' word format. Any posts breaching these guidelines will promptly be removed from the server and the offender may be excluded from further posting to the HyperScale Forums. Off-topic posts may also be removed from the server.

In addition, Plane Talking is not a forum for the public criticism of the models that appear as Galleries or Articles. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.

Finally, please note that this Discussion Group is privately operated and that I reserve the right to delete any post or cancel any registration for any reason whatsoever.

free counters