So, which apoxie paste for general seam filling?March 12 2012 at 12:00 AM
|Albert Gentry (Login AlbertGentry)|
from IP address 184.108.40.206
I just looked - so many choices!
|March 12 2012, 12:15 AM |
That's all you need. Having used both Milliput and Magic Sculpt, I'm now sold on Aves Apoxie Sculpt Super White. It's got the finest grain of anything I've ever seen, cures in a few hours, and cures to a nice white color. Like most all two part putties, it can be worked and smoothed with wet tools, and is easily sanded when cured.
Mike, i have used Apoxie two part putty for years is the
|March 12 2012, 9:31 AM |
Super White a one or a two part putty?
|March 12 2012, 10:53 AM |
I keep my tubs of Fixit in zip bags to extend the life
|March 12 2012, 11:09 AM |
still they get hard and go off long before you can use it
|March 12 2012, 11:24 AM |
I also recommend Apoxie Sculpt. It was the perfect solution to smoothing out the nasty belly-seam on my Czech Model Skyknight.
|March 12 2012, 8:20 PM |
Im working on a Welsh Models C-119 is it ok on Vac plastic & does it srink?
|March 13 2012, 7:28 AM |
I've not tried it on vac plastic, but I believe it should work just fine. I did not notice any shrinkage when I used it.
Posting or replying to messages on Plane Talking requires visitors to register:
- First you will need to register with Network 54, the Forum provider. Click here to register with Network 54. (If you already have a Network 54 Login you can go straight to the next step)
- Then, while signed in to Network 54, you can sign up for HyperScale's forums. Click here to sign up for HyperScale's forums.
Your user name and password will give you full posting privileges to all of HyperScale Forums.
Please note the following conditions of posting:
All contributions are welcome but please refrain from political or abusive comments, racially or religiously offensive remarks, swearing (including the thin disguising of swear words with asterisks and other characters), insulting language and crude metaphors. Please do not use Plane Talking as a public platform to complain about retailers or manufacturers (about issues such as broken or missing parts) before you have followed all normal channels to resolve any greivance. Plane Talking is not the place to conduct personal feuds or for posting personal attacks. Please do not post in capital letters only, as this is considered to be shouting and therefore impolite. Also, please do not post in 'texting message' word format. Any posts breaching these guidelines will promptly be removed from the server and the offender may be excluded from further posting to the HyperScale Forums. Off-topic posts may also be removed from the server.
In addition, Plane Talking is not a forum for the public criticism of the models that appear as Galleries or Articles. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.
Finally, please note that this Discussion Group is privately operated and that I reserve the right to delete any post or cancel any registration for any reason whatsoever.