is usually clear from the orientation of the part, and it's other detail. But in the lack of any clear information, I usually bend the part so that the bend line will be inside the assembly, and therefore less visible on the completed assembly.
The instructions will generally show which way the part...
March 15 2012, 10:51 AM
...is to be bent. Remember, there is also a "top" and a "bottom" to each part, and by following the instruction sheet, it will usually be quite clear which way the bend is to be made. Normally the bend indicator line is on the inside of the bend, but there ARE exceptions.
Posting or replying to messages on Plane Talking requires visitors to register:
First you will need to register with Network 54, the Forum provider. Click here to register with Network 54. (If you already have a Network 54 Login you can go straight to the next step)
Your user name and password will give you full posting privileges to all of HyperScale Forums.
Please note the following conditions of posting:
All contributions are welcome but please refrain from political or abusive comments, racially or religiously offensive remarks, swearing (including the thin disguising of swear words with asterisks and other characters), insulting language and crude metaphors. Please do not use Plane Talking as a public platform to complain about retailers or manufacturers (about issues such as broken or missing parts) before you have followed all normal channels to resolve any greivance. Plane Talking is not the place to conduct personal feuds or for posting personal attacks. Please do not post in capital letters only, as this is considered to be shouting and therefore impolite. Also, please do not post in 'texting message' word format. Any posts breaching these guidelines will promptly be removed from the server and the offender may be excluded from further posting to the HyperScale Forums. Off-topic posts may also be removed from the server.
In addition, Plane Talking is not a forum for the public criticism of the models that appear as Galleries or Articles. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.
Finally, please note that this Discussion Group is privately operated and that I reserve the right to delete any post or cancel any registration for any reason whatsoever.
