<< Previous Topic | Next Topic >>Return to Index  

Too bad the Platz new T-33B does not have . . . .

April 4 2012 at 8:25 AM
Bruce Trombecky  (Login jthutt)
HyperScale Forums
from IP address 108.56.149.149

The inside stringer ribbing for the flaps either as a seprate flap piece or as a P.E. part. Though it took me one evening to create this detail from plastic strips for my Heller DT-33B project. Still trying to find the Aires fret that has this detail that is long OOP !

With new kits, I always hope that the kit manufactures realize all aspects in kit engineering of their subjects and easily miss certain details. Especially since the flaps bleed down and are always exposed!

Just a little rant!

 
 Respond to this message   
AuthorReply

Lynn
(Login lmritger)
HyperScale Forums
24.254.240.101

Bear in mind this may be a simple business decision...

April 4 2012, 8:57 AM 

as engineering the molds to include that detail either on the face of the mold itself or as a separate part would incur additional up-front costs that Platz likely decided they couldn't afford to absorb. We often forget that our favorite companies have to fund these productions somehow, and each "hole" in a mold means additional money for tooling costs and raw materials.

Lynn

"History is not 'was', it 'is'." - William Faulkner

 
 Respond to this message   
Dave Morrissette
(Login DaveMorrissette)
HyperScale Forums
173.89.241.214

Agree

April 4 2012, 11:04 AM 

I am sure it was left off for a good reason and that was probably cost vs. a trifle more accuracy that some people want

Dave

 
 Respond to this message   
MichiganPete
(Login MichiganPete)
HyperScale Forums
108.15.203.61

T-33 flaps do not bleed down

April 4 2012, 1:58 PM 

The last item on the checklist is to select "flaps down" on all F-80 anf T-33 variants.

 
 Respond to this message   
Bruce Trombecky
(Login jthutt)
HyperScale Forums
108.56.149.149

Thank you for the clarification, though either way if . . . . .

April 4 2012, 6:13 PM 

he flaps are down by selection or have bleeded down by lack of hydrolic pressure, the flap ribbing is exposed and looks better when the kit is on display.

I may take a look at all of my T-33 images to see what the persentage have the flaps shown down.

Thank you Pete and also for all that have responded.

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  

Posting or replying to messages on Plane Talking requires visitors to register:

  1. First you will need to register with Network 54, the Forum provider. Click here to register with Network 54. (If you already have a Network 54 Login you can go straight to the next step)
  2. Then, while signed in to Network 54, you can sign up for HyperScale's forums. Click here to sign up for HyperScale's forums.

Your user name and password will give you full posting privileges to all of HyperScale Forums.

Please note the following conditions of posting:

All contributions are welcome but please refrain from political or abusive comments, racially or religiously offensive remarks, swearing (including the thin disguising of swear words with asterisks and other characters), insulting language and crude metaphors. Please do not use Plane Talking as a public platform to complain about retailers or manufacturers (about issues such as broken or missing parts) before you have followed all normal channels to resolve any greivance. Plane Talking is not the place to conduct personal feuds or for posting personal attacks. Please do not post in capital letters only, as this is considered to be shouting and therefore impolite. Also, please do not post in 'texting message' word format. Any posts breaching these guidelines will promptly be removed from the server and the offender may be excluded from further posting to the HyperScale Forums. Off-topic posts may also be removed from the server.

In addition, Plane Talking is not a forum for the public criticism of the models that appear as Galleries or Articles. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.

Finally, please note that this Discussion Group is privately operated and that I reserve the right to delete any post or cancel any registration for any reason whatsoever.

free counters