<< Previous Topic | Next Topic >>Return to Index  

Mr Paint WWI PC10

September 13 2017 at 12:34 AM
bernard payne  (Login bernie.payne5)
HyperScale Forums
from IP address 124.168.150.155

Anyone out there used this paint? It sprays beautifully without any thinners but in my experience it dries unevenly. Some areas nice and smooth,others dead flat and some areas in between. Am I doing something wrong or is it the paint? Any comments welcome. TIA.

 
 Respond to this message   
AuthorReply
Rob H
(Login rlhart13)
HyperScale Forums
76.167.73.83

I haven't experienced that, but I always spray over primer

September 13 2017, 7:16 AM 

and thin with Future. I have achieved a consistent and uniform semi-gloss finish. I have noticed the viscosity (and resulting coverage) varies from one bottle to the next. I have not sprayed PC10, but only some of the French and Italian colors.

 
 Respond to this message   

Craig Baumer
(Login boom175)
HyperScale Forums
170.93.144.3

Mr. Paint drying unevenly/

September 13 2017, 8:19 AM 

Have you ensured that its fully mixed. Mr Paint really separates pigment from carrier quickly in my experience.
Craig Baumer
IPMS Baltimore
Former A-10C Crew Chief MD ANG
Retired

 
 Respond to this message   
kuya
(Login Makulit)
HyperScale Forums
68.189.254.214

I also used it .

September 13 2017, 11:45 AM 

With MR Colors you might want to check your PSI , I recent build I upped the PSI to 20 and didn't release it was that high
I noticed my spray was a little grainy and quick to reduce it to 15psi and all was well

See if you vary the PSI and see if it changes .

 
 Respond to this message   
bernard payne
(Login bernie.payne5)
HyperScale Forums
124.149.46.65

Re: I also used it .

September 13 2017, 5:01 PM 

Thanks for the tips Guys. I thought that pressure might be a problem and it seems this paint sprays well a quite a low pressure. I'll try these tips and see how I go.

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  

Posting or replying to messages on Plane Talking requires visitors to register:

  1. First you will need to register with Network 54, the Forum provider. Click here to register with Network 54. (If you already have a Network 54 Login you can go straight to the next step)
  2. Then, while signed in to Network 54, you can sign up for HyperScale's forums. Click here to sign up for HyperScale's forums.

Your user name and password will give you full posting privileges to all of HyperScale Forums.

Please note the following conditions of posting:

All contributions are welcome but please refrain from political or abusive comments, racially or religiously offensive remarks, swearing (including the thin disguising of swear words with asterisks and other characters), insulting language and crude metaphors. Please do not use Plane Talking as a public platform to complain about retailers or manufacturers (about issues such as broken or missing parts) before you have followed all normal channels to resolve any greivance. Plane Talking is not the place to conduct personal feuds or for posting personal attacks. Please do not post in capital letters only, as this is considered to be shouting and therefore impolite. Also, please do not post in 'texting message' word format. Any posts breaching these guidelines will promptly be removed from the server and the offender may be excluded from further posting to the HyperScale Forums. Off-topic posts may also be removed from the server.

In addition, Plane Talking is not a forum for the public criticism of the models that appear as Galleries or Articles. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.

Finally, please note that this Discussion Group is privately operated and that I reserve the right to delete any post or cancel any registration for any reason whatsoever.

free counters