<< Previous Topic | Next Topic >>Return to Index  

heat soak in airtemp sensor

July 18 2005 at 9:33 PM
No score for this post
  (no login)
from IP address 209.241.107.151

 
I have a 2jz-gte motor with a emf4 sds system. I am having problems with the car running fine at night on the highway, then during the day time the car starts to run very rich. Only thing that changes is air temp. Can I move the air temp sensor to the 10 inches past the throttle body? Much cooler there.

Thanks

Derek

derektall@qwest.net

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
AuthorReply
Felix
(no login)
194.73.151.116

Re: heat soak in airtemp sensor

No score for this post
July 20 2005, 12:18 PM 

You want to position your temp sensor either right before or right after the throttle body. How much of a diffrnce is the temp from day to night?

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Anonymous
(no login)
209.241.107.151

Re: heat soak in airtemp sensor

No score for this post
July 25 2005, 6:03 PM 

got it fixed. air temp settings needed adjustment

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Current Topic - heat soak in airtemp sensor
  << Previous Topic | Next Topic >>Return to Index  
Create your own forum at Network54
 Copyright © 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement