hello i am a new user

i want your help
i have a toyota yaris 1.3l and i put a sds em4-f system
i cant start the engine
i have injection pulse and spark fire but it wan't start
ihave put the magnets outside of the puley because i can't
put them fromthe inside first mag 80 deg BTDC and triger
mag 120 deg BTDC
did any one have any idea
i have dudle check every thing and it is all right

thanks for your help

jim from Greece

i had the same thing happen to me on my first install all i did to get the engine to start was richin to fuel mixture up using the mixture knob

i did that but nothing hapend i wander if i put the magnets incorect

i have put the magnets at the front mabe it is wrong because the elements it's not the same direction us you put the from behind d
did ane une have an advice thanks

jim from greece

depending on car, remove cam restriction (belt or chain) and pull plugs
spin pully by hand and watch display to see if your magnets are seen, if they aren't, something is wrong with your magnet/hallsensor setup, if they are seen, check cam timing and quality of gas