Respond to this messageReturn to Index
Original Message
  • Re: Sight settings
    • ppc Ken (no login)
      Posted Apr 18, 2008 2:26 PM

      The set screws correspond to the three-position knob on the side. Typically (for PPC at least) you put the side knob on the #1 setting - then turn the #1 top set screw up/down until you are hitting the X ring at 7 and 15 yards - probably with a center mass hold. Then the knob is moved to the #2 setting and the #2 set screw is turned up/down until you are hitting the X ring WITH A NECK HOLD at 25 yards (some shooters use a center mass hold at 25, so you want to make your adjustments accordingly - whichever works best for you). Finally move to the #3 knob setting and adjust the #3 set screw for an X ring hit at 50 yards WITH A NECK HOLD. Bottom line - there are three different sight adjustments you can make for whatever distances/courses of fire that you want. Pretty neat little gadget, isn't it? Good luck, ken
    Login Status
  • You are not logged in
    • Login
      Password
       

      Optional
      Provides additional benefits such as notifications, signatures, and user authentication.


      Create Account
    Your Name
    Message Title
    Message Text
    Options
    Enable formatted text (what's this?)
     
    Notice: This is a moderated forum. Your post will not show up until a moderator approves the message. If you regularly have full posting privileges, you may have to login first.
          


    Find more forums on Law EnforcementCreate your own forum at Network54
     Copyright © 1999-2017 Network54. All rights reserved.   Terms of Use   Privacy Statement