I have a 93'Mazda 636 Lx, the"Hold"ligh flashing when I drive for about two weeks. then after my keep driving for another two or three weeks with "Hold"ligh flasing, the "Hold"light disappears. When the light is flashing, the Transmisstion shifting at 1 gear is harder, when the Light is off, everything is fine.I have sent it to garage,but they can not find out using computer. So could anyone tell me how to simply turn off the light when it appear. That maybe at least make me feel good for a while.
Scoring disabled. You must be logged in to score posts.
I have a Millenia s and i put the car into N and turn it off and then back on and put it back into D.
Scoring disabled. You must be logged in to score posts.
you have a trans problem
No score for this post
November 9 2002, 11:56 PM
the flashing of the hold or the o/d light in the 626 is the OBD for the trans letting the driver know their is a problem. when the light is flashing the gears are going to feel as if they are almost slamming into the gear 1st to 2nd is the worst, this is because the transmission is avoiding the computer and reling on just the hydrolic lifters in the trans. the transmission on the 1993-1997 mazda 626 is not a very good transmission. there is many other people that have had the same problem. I am one of them. Best bet go to a transmission specialist.(I went to AAMCO) you will have to either replace the trans or get it rebuilt. Good luck! any other questions please email me at billy_21915mybluelight.com
Scoring disabled. You must be logged in to score posts.
Current Topic - How to simply turn the "hold" flashing off