First> PLEASE reply by e-mail. asohc427@aol.com.I do not come to the site to ck messages.I am parting 3- 67 390 cars , 2- 66 390 cars ,1- 66 390 cyclone conv. , 2- 69 torino H code coupes ,1-68 390 gt torino F.B ,1- 71 fulley loaded M code GT ranchero.And many others.Some have many good parts left on them. I have removed many parts and cleaned.SORRY NO GOOD CONSOLES OR 66 ARM REST.Please give me a e-mail for your needs. I will try to answer every day. or call 770-787-8838 up till 10:00 e.s.t. Im 40 miles east of atlanta.
p.s 68 GT S code ranchero rolling shell. It was red,white int,4-speed,p.d.b,p/s and A/C.nEEDS TO GO GETTING WORSE BY THE MIN.$700.00.Not a eat up rust bucket.(has some)
Thanks Jack 770-787-8838

I am looking for a 4 speed console plate for a 66 fairlane. also looking for the linkege that goes from the Z bar to the clutch fork and clutch pedal. Also need the equalizer that goes mounted to the engine block in a big block 390. Converting from A/T to 4 speed.
Thaks.
Angel

I am looking for Z bar with all linkege for a 390. Also need 4 speed console plate. If you have it e-mail me at angmag@sbcglobal.net or call me at 773-208-9366.
Angel

Thank you,
Bill Kemp

Looking for the above for a 1967 Fairlane Ranchero. The 66, 67 Fairlane or Cylone bucket seats would be great. Even the 68 Torino would probably work. Let me know if yu have any parts left.

I have a set of 1966 fairlane gt buckets. they are complete with all side stainless . I want 200.00 for the set. email cclky@aol.com

D
O YOU STILL HAVE THE SEATS AND WERE ARE YOU

do you have a set of bucket seats for 1966 fairlane thanks mark

I have two complete sets of seats buckets and rear one set white one set red

DO YOU STILL HAVE SEATS

would like to know if you would have the front fender emblems on the 1966 cyclone cont. ( flag and cyclone badge) Gary.

IS IT REPAIRABLE!!!! CALL ME 251 929-1930 OR CLICK MY NAME AND E-MAIL ME PICS.
THANKS!

NEEDED HEAD LIGHT BEZELS,UPPER HOOD MOLDING,TAIL LIGHT BEZELS.

I kept any thing good. Did not get a whole lot off this one. May be some small parts left.
Jack

I need a cowl top for my 67 Fairlane. My cowl vents are good but some pine needles got into the cavity and ate away some of my cowl top at the weld flange where it mates to the firewall. If you have one, how much to cut it out and ship it to 48442. Thanks, Dale.

If i find one ill let you know.
Jack

Have a friend that had her 67 Fairlane 4 door broad sided. She waants to fix it since it was her mothers car. Need left rear quarter and back door on left side. Do you have them.
Thank you,
Mike

Thanks

I hvae four door parts but I do not have rear panel but have doors selling for $100 a piece you pay shipping call me at 806-674-9744 after 9:00pm on weekdays anytime on weekends.

I have a complete door

local[ central N.J.] vintage wrecker has nice 67 fairlane 4 door CALL John at 973-332-5130, tell him I sent you good luck Bruce

Do you have a set of headlamp bezels for a 67 fairlane 500? I am not looking for show quality just good driver quality. Thanks Joe

how are the quarter panels on the cyclone.. i'm looking for lower quarters for my 66 comet,steering colume for a floor shift car.,,tail lights,,center consol for a 4spd car..also looking for the alum. strip that mounts between the tail lights and says cyclone on it..cyclone door panels, or the inner tag plate, mounting on the door panels that say cyclone..

jack

I have a 1967 Cyclone that currently has manual steering and would like to make it power steering.
Does anyone have powersteering?


I am also looking for all of the glass for a 1964 fairlane hardtop.

have all for hardtop 800 $

Looking for a clock

I am looking for a '67 Fairlane 2 door, passenger side door to restore my grandmother's car.

Looking for a driver side outer rear wheelhouse with flanges in usable shape. Please respond with price.
Thanks
Lou

JACK

Some supention,disc brakes,1 or 2 columns,junk buckets seats. Please Just ask. I don't ck here to often. so e-mail me. ASOHC427@AOL.COM.
Thanks Jack

whats the condition of the driver side fender on the 68 or 69 torinos?

Thanks for asking.
Jack

i have a 66 fairlane with 390 and 3spd on the column. i am looking for a dust cover,do you have any???

Thanks for asking.
Jack

hello, I am in need of a original rear wiew mirror holder and also were the sunvisors meet for a convertible, if it needs rechroming no problem !!

contact me via rguaa@online.no

Rolf Gunnar

Thanks Jack

hi , im new to this site and am looking for a colume for a 67 fairlane automatic colume shift ..i have the c6 trans if that makes a difference !! thanks for your time and effort , John

John, I have a 1967 fairlane steering column that came out of my car, which was a 390 with C6. If you are interested, let me know at spalma@forsiteprop.com. The parts are in Indianapolis, IN, 46236. Thanks, Stan

I need bracket 7592 as shown in this picture below. Courtesy of Joe Santillo. Thank you Joe.

 

I also need a two speed wiper switch from a 67 Fairlane. I am installing a new Painless wiring harness and I already have a 67 two speed motor.

____________________________________________
:-)Brian Gray

66 Fairlane GT 484FE 4spd (Weekend Cruiser)
http://www.supermotors.net/vehicles/registry/7061

call me or email with pics and price
505-758-4005

Sorry i have sold all of them.
Jack

What do you want for the tailgate trim / front grill / and steering wheel if it's uncracked?