Found this on the mpc forums, bet it will work on the ensoniq asr-10, and eps-16+
LINK
http://mpc-forums.com/viewtopic.php?f=4&t=119291
ok i was looking for a working microtech pcd-25 for my mpc60 but invane so i find the way to make a cheap CF card by myself... the only lack or differences is that is not hotswap so u have to turn off the mpc in order to remove the card.. but it's a long way cheaper and due the fact working pcd microtech is seems to be rare...
buy this
http://www.acscontrol.com/Index_ACS.asp ... dapter.htm
and it's a good cf card reader with the support to be fixed where the floppy is now...
then i find this is quite ok to do the scsi to ide conversion
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0044078177
and then u should use a scsi 50 pole ribbon cable to reach the scsi of the mpc... i found this kit is pretty well explained here
viewtopic.php?f=4&t=68300&hilit=+pcd*
and so for less than 50 dollars for the scsi to ide and the cf card reader and dunno what for the kit u will have a perfect (in time) digital store solution for your mpc...
peace
ale