I've found distributor from FJ20ET (4 wires type) and want to install it on my FJ20E.
On this distributor its type is specified as - D4P83-10 (part number 22100-R2203).
Can someone help to find out part number for cap what must fit to this distributor?
Thank you!
Scoring disabled. You must be logged in to score posts.
Distributor of FJ20 n/a has the number 22100-R2405l, distributor cap is 22162-R2401. Maybe the cap is working too on a FJ20ET-Distributor...
Scoring disabled. You must be logged in to score posts.
(no login) 203.217.57.224
Re: Distributor cap part number
No score for this post
September 10 2005, 1:32 PM
do you know were the wires go i have same dizzy
Scoring disabled. You must be logged in to score posts.
(no login) 193.0.240.25
Re: Distributor cap part number
No score for this post
September 10 2005, 5:58 PM
There is 4 wires - "black" - ground wire, "red" - +12V, it's pin 27 of standard ECU or "IG" position of ignition switch, "green" and "white" - signal wires (0 degree and 180 degree), which cames to pins 8 and 17 of turbo ECU (from FJ20ET or CA18ET).
But I'm not sure where each of this two goes, i.e. "green" wire 0 degree or 180 degree signal I'm not sure.
I've used this distributor on FJ20 ECU, but I made changes in usage of distributor in the electrical scheme, but only because my standard distributor is dead and there is no opportunity to find another.
Do you have any opinions how to test standard IC distributor (two wires type with built in IC scheme)?
Scoring disabled. You must be logged in to score posts.
