September 19 2005 at 8:21 PM No score for this post
DR nutta (no login) from IP address 139.168.50.201
Hey all, i was just wondering if anyone has had any experience with Microtech ECU's on FJ motors, and generally what the system is like? i was cosidering buying a system but am unsure? any advice
Scoring disabled. You must be logged in to score posts.
Ive been using an older microtech MT-8 on my FJ20et for some years now. It is configed for dual ignition output (wasted spark).
To date, the ECU has performed well and is easy enough to tune via the remote handpiece.
The cold running enrichment is a little bit clumsy due to insufficient loadpoints but its a small price to pay.
The only dramas I have had were related to wiring dramas and nothing to do with the ECU itself.
Microtech themselves have usually been quite helpful with any dramas I have had.
Id have another Microtech ECU anytime.
l8tr
E
Scoring disabled. You must be logged in to score posts.
Gareth (no login) 203.29.152.23
ECU
No score for this post
September 21 2005, 12:14 AM
I know there are lots of posts covering different ECU types etc but i know that there are a few people around using microtech on FJ and are suppose to be pretty good bang for buck. I personally use a WOLF 3D V4 and have had really good results. Starting is great, hot or cold and drivability is spot on. The idle is a little rough but i dont care, it sounds tuff and i'm running high pressure with 550s so i expected it.
Gareth
Scoring disabled. You must be logged in to score posts.