<< Previous Topic | Next Topic >>

Return to Index

RB25 Gearbox swap November 1 2007 at 9:26 PM No score for this post		(no login) from IP address 219.206.132.122

hey guys how are you all doing? im going to put a RB25T gearbox on my FJ20 turbo and I know I have to redrill the top 2 bolts hole on the bellhousing to fit the FJ block, but I want to know about the starter! Do I have to do anything to the bellhousing to fit it on the FJ block? or just bolt on? Thanks You!! P.S. I am so happy thers a FJ20 site that can help ever one!!!

Scoring disabled. You must be logged in to score posts.

Respond to this message

Author

Reply

fjescort
(no login)
219.88.15.40

Re: RB25 Gearbox swap

No score for this post

November 7 2007, 5:13 PM

i have done this conversion,starter bolts straight up ,so do all other bell housing bolts except the top 2 like you mentioned,you will need to make a new crossmember and get a drive shaft made with the bigger rb25 yoke.

Scoring disabled. You must be logged in to score posts.

(no login)
219.206.132.122

Re: RB25 Gearbox swap

No score for this post

November 7 2007, 6:49 PM

Thank You Very Much fjescort
will do so!

Scoring disabled. You must be logged in to score posts.

Current Topic - RB25 Gearbox swap

Respond to this message

<< Previous Topic | Next Topic >>

Return to Index