|
swapping injectors on standard fj fuel rail?January 20 2008 at 9:45 PM
No score for this post | mick (no login)
from IP address 124.176.53.31 |
| i need to swap injectors on my fuel rail but how do i reseal the new injectors? i have new buckets but do these need to be pressed on to seal properly. Can i do this myself or does a injector place have a special way of doing this? would hoseclamps at either end leak? any info appreciated cheers
|
|
| Author | Reply |
Anonymous
(Login tassuperkart)
124.179.255.210 | Re: swapping injectors on standard fj fuel rail?No score for this post | January 23 2008, 6:55 PM |
Clamps dont look pretty but work OK.
L8tr
E
|
| Scoring disabled. You must be logged in to score posts. | |
|
Anonymous
(no login)
124.176.0.19 | Re: swapping injectors on standard fj fuel rail?No score for this post | January 23 2008, 10:14 PM |
yeh true....whats the proper way of doing it tho?
|
| Scoring disabled. You must be logged in to score posts. | |
|
Anonymous
(no login)
124.170.3.97 | Re: swapping injectors on standard fj fuel rail?No score for this post | January 28 2008, 9:58 PM |
Well if Nissan used clamps to seal the hose tails on the fuel rail so can you . I had them on both ends of the short fuel hoses with no probs at all - that was with modified Bosch 403 (Sierra) injectors .
I cant remember but make sure you use the right size EFI hose . Its available in 5/16 and 7.5mm and 8mm .
|
| Scoring disabled. You must be logged in to score posts. | |
|
Anonymous
(no login)
124.187.207.129 | Re: swapping injectors on standard fj fuel rail?No score for this post | January 29 2008, 8:05 PM |
what are the buckets for? is everyone just using clamps at both ends?
| |
| Scoring disabled. You must be logged in to score posts. | |
|
|
|