<< Previous Topic | Next Topic >>Return to Index  

external gate service

October 16 2008 at 9:36 PM
No score for this post
Gareth  (no login)
from IP address 78.150.216.225

 
Hi everyone,

Curious, my car has been sitting for 8 months while i have been overseas, and i had a thought the other day about the external gate.

I have a 48mm Turbosmart external gate on it and i was curious that if it has been sitting for a long time would there be any chance of it seizing up or something like that and needing to be serviced. I understand the simplicity of a gate and have had it apart to change the springs before but never gave it a thought.

Any ideas?

Thanks,

G

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
AuthorReply
Anonymous
(no login)
60.229.110.203

Re: external gate service

No score for this post
October 16 2008, 9:51 PM 

yeah mate worth a thought. i had my car sitting for about 8 months under cover and i had to remove the blow off valve for some better access into the engine bay. and out of curiosity i pushed on the valve and couldn't budge it. i then backed the tension right off and still couldn't move it. i pulled it apart and it was seized shut from sitting around. gave the valve a slight rub with some fine wet and dry and lubed the housing a little bit and it went back together and works perfect

 
Scoring disabled. You must be logged in to score posts.
Current Topic - external gate service  Respond to this message   
  << Previous Topic | Next Topic >>Return to Index  
 Copyright © 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement