Trevor one thing to do first is locate all the support arm locations, make sure your measurements are right. Then Mark them. mainly on the turret. Do this before you put any detail on. It will save you about 5 hours of tedious measuring with delicate detail in the way.Plus your slat will end up being more true.
For the Cam cover I have some stuff in the works and plan to do another Canadian 2A6. By the time I have this one done the tanks in country will have all the slat beat off them and I'll won't need the PE set for my next Leopard.
This message has been edited by c2jerrett from IP address 174.116.80.30 on Jul 29, 2009 10:56 AM
