Update

I had a few hours to spare so I did a little work on my Can. Leo. Its been hot lately so not to much into modeling. There's been mostly talk of real 1to1 stuff on here lately so I thought I'd bring us back to 1/35.

I want to get the lower haul done before I finish with the haul brackets and slat.

A little CM here I'll cover that better later with the turret and upper haul.



Some shading, I'll cover that as well later, I think I have a few new tricks to get that dust right.Just a little pre info I spread some acrylic flow release on the model and then sprayed on some thinned Vallejo in the dust color.


I use this stuff from tri-art the same way I use Model air from Vallejo. I mixed their retarder to give myself more working time and it helps as a pigment sealer. I added a little of tri-art Naples Yellow and Mig light dust to a mix.






The oil was done with what else but oil paint I mix three colors in three different viscosities. This help break up uniformity. I don't have a paint sponsor supplying me paint, so I get the cheep stuff.


Next I'll finish the build and start the CM on the model.

Any help here would be good Thanks