--


  << Previous Topic | Next Topic >>Return to Index  

diana model 34 (t5)

February 13 2005 at 7:03 PM
  (Login pyroboy68)
from IP address 24.150.75.156

-
Had the gun about a month maybe 50 shots and the cheap plastic trigger broke from the vibration of the recoil.It broke right before were the main pin goes through. Is there a metal upgrade out there or a stronger plastic one.Is there any warranty coverage in Canada, I purchased it in the States,it would cost quite a bit to send it back.

 
 Respond to this message   
AuthorReply
6talldog
(no login)
24.36.76.3

I have never heard

February 13 2005, 8:24 PM 

of one of these ever breaking. If you cannot get warranty coverage your best bet would be to order a replacement as the part should not be expensive.

- RG

 
 Respond to this message   

(no login)
24.150.75.156

replace trigger

February 14 2005, 5:43 AM 

I order two at 8.95 each from airgun express.A place in Toronto try charging me 25.00 each.Just wondering if it will break again.There is a flaw with the design were the second adjustment screw was it is replaced with a little pin across it then in front of that there is the main pin just to many hole so close together.Email diana in Germany but with no reply.

 
 Respond to this message   
Current Topic - diana model 34 (t5)
  << Previous Topic | Next Topic >>Return to Index  
Find more forums on Air GunsCreate your own forum at Network54
 Copyright © 1999-2008 Network54. All rights reserved.   Terms of Use   Privacy Statement