Hi Guys,
I came across a spring compressor by B-Square that claims to be able to work on any spring air rifle. Check it out here http://www.compasseco.com/index.php?action=item&id=307&utm_medium=shoppingengine&utm_source=smarter

I was wondering if anyone has given this a try and if so, do you think that i could use it to replace the spring on my 350 Magnum?


Please let me know



Kevin

But you don't need to spend $125 to get the spring out of your gun. Lots of info on home-made compressors out there. Look at the picture - a bar clamp on a 36" length of pipe will do the trick on most springs. As long as you've got 3-6" of adjustment on it you'll get the pre-load off of most springs.

"but I'll be needin' that gun, fer squirrels and such."

It'll work on your 350 but you may need to do a little bit of cutting/filing of the supplied end piece to fit the Diana. You can do it cheaper but I bought one because I plan on using it many times in the future and it's purpose built. Yes, the design is flexible enough to allow it to be used on many different springers.

Took my 350 as well as my 1250 Gamo Hurricane apart. Take your time and be careful. It works very well. HTH,Benson.