I see alot of questions concerning lube tunes. I have no idea how many pics can load to a single post, so I will do this in parts. First,things needed,
Spring compressor (email me if you need info on compressor) one can of brake cleeaner, wooden dowel, screw drivers, paper towels, rubber band, aluminum roasting pan, rubber gloves, chamber oil, and from Jim Maccari...black dampening tar, moly, new piston seal if needed.
First remove end cap and cocking lever from compression chamber.
[IMG]
[/IMG]
Next remove safety. NOTE: look into trigger assembly, and note how that piece of metal goes between the forks of safety tab. Very important on assembly.
[IMG]
[/IMG]
After securing gun action in compressor put slight pressure on trigger assembly with your c clamp. Ease pins out with punch (will easily slide out) back up on the c clamp to relieve pressure on spring.
[IMG]
[/IMG]
Put this trigger assembly to one side.
[IMG]
[/IMG]