I made a cocking grip for my Tx200MKIII like the TX200HC has but this one is a little longer. Now I'm gonna do one for my 46. Anyone on here do any black anodizing? I want the one on the 46 to be black.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Thanks for looking

that looks great on there. I know a guy that does powder coating but, I,ll have to ask around about anodizing.

Here is another option if you need it.
A few months ago I wanted to paint an aluminum tube that gets handled quite a bit.
Anodizing was not an option for me and I used an aluminum primer and a top coat finish with paint called Hammerite.
Its tough and is holding very well. I got a semi mat finish by rubbing down the final 2 coats with wet 500 grit-paper.
Having said this, anodizing is very tough, tougher than paint, and if you can get it anodized, so much the better for your application.
HTH

cool thanx, I'll check into that. The more I can do myself the better.

I'm gonna leave the TX grip raw color. I think it looks good now that I polished the trigger and put the adj. butt pad on. If I put one of these pads on the 46, I might leave that one raw as well.

I always forget to ad pics. here ya go..
[IMG][/IMG]
[IMG][/IMG]