|
Sorry just a couple more 460 questionsFebruary 13 2009 at 11:39 AM | Barry.g (no login) from IP address 195.92.194.11 |
| Dose the piston seal and breach seal from a 52 fit a 460 also the spring?
Thanks Barry.g |
|
| Author | Reply |
JC (no login) 96.245.42.185 | I'll go for 2 of 3 | February 13 2009, 3:03 PM |
Piston seal - Yes, pretty much all the current line of RWS uses the same piston seal. The spring will fit, but is not the same (lighter spring weight, I believe different length). I would guess the seal is the same, but its just a guess. For the bonus question, the spring guide is the same.
I put a 46 spring in a 460 and got a smoother shooting, 16 fpe .177.
JC |
|
Barry.g (no login) 195.92.194.12 | Thanks JC | February 13 2009, 3:41 PM |
Your not going to believe this I am having second thoughts now about a 52 as they are time proven and no problem with spares hear.
I have got to tuesday to make up my mind.
Thanks for everybody's help Barry.g |
|
JC (no login) 96.245.42.185 | Nothing wrong with getting a 52! | February 13 2009, 4:27 PM |
Can you get one of those in .177?
They are a little more complex to disassemble than the 460, but just the additional step of taking off the sidelever.
I personally am a underlever fan, but having just the barrel sticking out there in the 52 is kinda nice, particularly when customized with say a muzzle brake...
I guess that points me to a Air Arms Pro Sport; NO, no more air rifles!
Good Luck deciding,
JC |
|
RedFeather (no login) 173.73.150.148 | And 52's come in the Luxus stock! | February 13 2009, 4:49 PM |
Very nice piece of lumber. |
|
Mark (no login) 70.178.199.121 | Go with a 54 | February 13 2009, 8:45 PM |
smoothest shooting out of all. | |
|
| Current Topic - Sorry just a couple more 460 questions |
|
|